Search

Pump accessories 

Compatible with all our high pressure pumps.

Showing 1 - 24 of 24 items
  • 135 €

    KIT includes:3 m plastic braided hose3x M 1/2" - holender element4x two-seater M 1/2"1x F 3/4" - holender element

    135 €
  • 201 €

    iTTHS is much more than a timer. Thanks to his experience in misting, we designed a convenient and comprehensive control system, specific for cooling applications, humidification, dedusting and deodorization.- Easy to install, just a few minutes and you're online.- Many indispensable functions not included in the same timer commercial value.- Check at the...

    201 €
  • 874 €

    iTTHS is much more than a timer. Thanks to his experience in misting, we designed a convenient and comprehensive control system, specific for cooling applications, humidification, dedusting and deodorization.- Easy to install, just a few minutes and you're online.- Many indispensable functions not included in the same timer commercial value.- Check at the...

    874 €
  • 153 €

    Sensors produced specifically for humidification and adiabatic cooling.Extended and accurate detection range, thanks to the digital factory pre-calibrated sensor, it does not require calibration.three transmission modes: Analog, Modbus and RTUsupply: 5-24 VDCoutput signals: 0-5 VDC – 1 wirerange temperature: -20/80 °Chumidity range: 0–100% RHcontact...

    153 €
  • 796 €

    Includes all the functions needed to manage a system:- Stat weekly programmer (management opening hours).- Interface for remote controls (by push button, radio ...).- Interface for industrial automation systems.- Humidity sensor and temperature with heat index calculation.- Setting desired heat index.- Setting the desired humidity.- Ready humidity...

    796 €
  • 139 €

    It provides a connection when the relative humidity drops below a manual set level.range detection: relative humidity 40% - 90%commutation: 5% (±1%), response time 5scontact capacity: 1,6A resistiveprotection: IP20conditions: 0-60°Cmediul life: > 50000 cicles

    139 €
  • 136 €

    It provides an analog signal proportional to the pressure, which can be detected by the electronic devices.range detection: 0-200 bar (max pressure 275 bar)precision: ±1%power: 5VDC ±0,1signal: 0,5V = 0 bar; 4,5V = 200 barbody: AISI 316 stainless steelconnection: 1/8”G

    136 €
  • 65 €

    It provides an analog signal proportional to the pressure, which can be detected by the electronic devices.range detection: 0-10 bar and 10-100 bar (adjustable with screws)contact: NO/NA , 2A max (resistive)body: brass, 1/8”G connection

    65 €
  • 111 €

    To depressurize the pipe and empty it. It is suggested to be installed to ensure proper operation of the anti-drip valve nozzle.It must be connected to a control device such as ITTHS timer.

    111 €
  • 196 €

    It can be connected directly to the filter. The pressure must be less then 2 bars. It can be used to dose the aromas, desinfection and natural extracts mix to repel insects.The dosing pump can be wired and integrated in the system iControl or iTTHS timer.

    196 €
  • 683 €

    includes: 7x 20 μm nozzlesmeasurements: 2,5 m (height)extension of the arm: 80 cmbasement: 200x200x5mminlet joint: 1/4"material: K033 stainless steel tube 48x2,6mmThe distance of the first nozzle holder is 80 cm from the ground, then they are fitted equally from each other.

    683 €
  • 59 €

    KIT includes:2 m plastic braided hose1x M 1/2" - holender element2x two-seater M 1/2"1x F 3/4" - holender element

    59 €
  • 135 €

    KIT includes:3 m plastic braided hose3x M 1/2" - holender element4x two-seater M 1/2"1x F 3/4" - holender element1x pressure reduce valve

    135 €
  • 35 €

    Filter housing with polypropilen insert 1 µm.

    35 €
  • 35 €

    Filter housing with polypropilen insert 50 µm.

    35 €
  • 119 €

    Suggested to reduce the pipeline vibrations and noises.Can be installed as a standard pipeline end.

    119 €
  • 529 €

    6 nozzles, 90° oscillation, three speeds. Possibility to modify inclination un to 45° from the horizontal. Misting fan with shovels of high efficiency in degrees to guarantee high speed and air capacity. This realise a very good mixture of air/water and makes it good to use in spaces of big dimensions where it is necessary to reach important distances.

    529 €
  • 361 €

    Only one central nozzle. 90° oscillation. Three speeds. Possibility to modify inclination un to 45° from the horizontal.

    361 €
  • 1 694 €

    Air diffuser under way profile: ideal for destratification and improves evaporation Nozzle position: avoids any fall of drops Hooks and supplied chains of series: simple installation Paint job to black powder: elegant and discreet

    1 694 €
  • 801 €

    Fan for Agriculture and Industry. Line of realized industrial fans in stainless steel and with motoriductor in a position to developing remarkable air exchanges. These fans are supplied without nozzles in order to have the maximum flexibility. For example it is possible to install window fans and nozzles in line inside the room.

    801 €
  • 862 €

    Fan for Agriculture and Industry. Line of realized industrial fans in stainless steel and with motoriductor in a position to developing remarkable air exchanges. These fans are supplied without nozzles in order to have the maximum flexibility. For example it is possible to install window fans and nozzles in line inside the room.

    862 €
  • 4 €

    Polypropilen insert 5 µm.

    4 €
Showing 1 - 24 of 24 items