The profile with substantial advantages
WERZALIT has expanded its already extensive range of terrace flooring with the new, entero 2.0 solid terrace profile. entero 2.0 is a long-lasting and low-maintenance alternative to a wood terrace.
The joint that is closed yet open
entero 2.0 offers a unique feature among all solid terrace profiles. The tongue and groove system allows a visually closed terrace surface that still doesn't allow weeds to grow up or dirt to fall down through the floor. At the same time, the longitudinal joint also serves as a covered drainage joint.
Drainage and load capacity
A special fastening technique was developed that also guarantees a high load capacity: an invisible installation clip with flexible spacing tabs. In the area of the tongue and groove connection, this clip ensures sufficient joint spacing even at maximum expansion to maintain unhindered drainage of surface water. Even when installed without an incline, water can flow off easily - perfect for spaces around swimming pools (only with the smooth surface). When laying with the grooved surface, a sufficient incline is always required to ensure proper surface water drainage.
entero 2.0 solid terrace profiles can be worked as easily as wood. Closed edges always result from sawing, meaning that curves of all kinds can be realised in terrace surfaces without any additional cover profiles. The solid design and special shape permit a low installation height combined with a wide span width. entero is also very well suited for short installation lengths, such as narrow garden paths.
Key benefits at a glance:
- Visually closed longitudinal joints
- Can be installed without an incline
- Splinter-free, high-quality surface
- No tropical wood used
- Low-maintenance and easy to care for
- 5 year warranty
The starting and end profiles must be cut to length at the installation site. Special lengths (rough cut) available on request.Surfaces: Brosso (brushed), Solco (finely grooved)3,6 kg/mlPrice for square meter.
Entero 2.0 Plus with visually closed longitudinal and transverse joints.The starting and end profiles must be cut to length at the installation site.Surfaces: Brosso (brushed), Solco (finely grooved)3,6 kg/mlPrice for square meter.
For installing onto Werzalit sub-framework bars.Each set contains:55 countersunk screws 4,0 x 30 mm,10 countersunk screws 4,0 x 50 mm.quantity: approx. 20 pcs./m2material: Stainless steel A2
Anti-slide strip 3 x 15 mm for fixation of the entero profiles onto the middle sub-framework bar or aluminium sub-framework profile.material: expanded rubber 1,5 cm 1000 cm 0,3 cm
For all foundations.With corresponding supports, as required. 7,2 cm 400 cm 3,8 cm 1,9 kg/linear mPrice for length meter.
For fastening the subframework edge bars, required for installing terrace profiles.each set contains: 40 concrete screws 6 x 40 mm and bitmaterial: steel galvanised
For installing onto aluminium subframework profiles.Each set contains: 55 blind rivets 4,8 x 10 mm10 self-drilling screws 4,2 x 32 mm.material: stainless steel A2
For use as a subframework for low heights, only for Terraza tiles and Entero profiles.material: aluminium, natural (Not suitable for paseo and terraza profiles). 6 cm 400 cm 2 cm 0,825 kg/lm
For laying underneath the sub-framework bar and alum. subframework profiles.material: rubber, EPDM-compatible 10 cm 10 cm 0,5 cm
For fastening the sub-framework bars on roofs with low height.material: galvanised steel 4 cm 30,7 cm 4,2 cm
For hidden fastening of terraza profiles.screw type: TORX 20material: Stainless steel A4
For hidden fastening of terraza profiles.screw type: TORX 20material: Stainless steel A2
For visible fastening of the starting and end profiles.screw type: TORX 20material: Stainless steel A2
For visible fastening of the starting and end profiles.screw type: TORX 25material: Stainless steel A2
For hidden fastening of terraza profiles in Aluminium SF profile.screw type: TORX 20material: Stainless steel A2
For visible fastening of terraza profiles in Aluminium SF profile.screw type: TORX 20material: Stainless steel A2
For covering expansion joints against buildings or walls, installed with aluminium cover angle.material: anodised aluminium, dark anodised or black anodised400 cm
Two-part, for covering separating and expansion joints. Fastening of the base profile with customer-provided anchors and screws. Fastening of the cover profile with stainless steel countersunk sheet metal screws.material:cever profile: anodised aluminium, dark anodised or black anodisedbase profile: anodised aluminium400 cm
Two-part, for covering straight or angled edges on terrace floors. Fastening of the base profile with customerprovided anchors and screws. Fastening of the cover profile with stainless steel countersunk sheet metal screws.material:cever profile: anodised aluminium, dark anodised or black anodisedbase profile: anodised aluminium400 cm
For covering the face sides of cut profile edges at roundings.material: anodised aluminium, dark anodised or black anodised400 cm
For covering expansion joints against buildings or walls (installed with alum. wall connection profile) and for covering profile edges cut straight or at an angle.material: anodised aluminium, dark anodised or black anodised400 cm
0,75 l (colourless).For maintenance of WERZALIT terrace surfaces. Freshens up the surface and acts to prevent soiling of heavily used floors.coverage: approx. 10 m2 (75ml/m2) for 1 coat,approx. 5 m2 (150 ml/m2) for 2 coats.Only apply to surfaces that have weathered for at least 1 year.
WERZALIT terrace cleaner is a highly effective liquid cleaner for WERZALIT terrace flooring. It removes thoroughly darkcoloured soiling, spots and films resulting from trees, plants, etc. Residues due to environmental influences are also effectively and thoroughly removed. At the same time, it protects the surface against future soiling.coverage: 10...