Paseo terrace profiles present a clear design, keep free of flourishes or embellishments. Both brushed surfaces have a typical, natural wood look.
Perfect for do-it-your-self
The simple fastening technique with installation clips allows any knowledgeable do-it-yourself-er to effortlessly install Paseo profiles. And like all Werzalit terrace floors, the profiles can be worked as easily as wood.
The Paseo terrace profiles can be used with either side facing out and are available in two attractive surface types: 'fino' with fine grooves and 'medio' with large grooves and an overlaid fine fluting. The additional brushing enhances the non-slip properties – even when wet – and lends Paseo a typical wood character. This clear style is supported by the open longitudinal joints. Paseo profiles are dye-penetrated and lighten naturally under the influence of weathering, but without losing their basic colour character.
Invisibly yet solidly fastened
Approximately 20 installation clips per square metre are required for fastening. They are attached in a practically invisible way.
Perfect system, simple installation
The system is so well-designed that even a capable do-it-yourself-er can easily perform the required installation work. More detailed installation instructions, including care information, can always be found at http://www.werzalit.com/ or obtained from a specialized retailer in your area.
Special lengths (rough cut) available on request.Surfaces: Fino, Medio2 kg/mlPrice for square meter.
For installing onto Werzalit sub-framework bars.Each set contains:50 recessed head screws 3,5 x 30 mm,10 recessed head screws 4,0 x 50 mm.quantity: approx. 20 pcs./m2material: Stainless steel A2
For all foundations.With corresponding supports, as required. 7,2 cm 400 cm 3,8 cm 1,9 kg/linear mPrice for length meter.
For fastening the subframework edge bars, required for installing terrace profiles.each set contains: 40 concrete screws 6 x 40 mm and bitmaterial: steel galvanised
For laying underneath the sub-framework bar and alum. subframework profiles.material: rubber, EPDM-compatible 10 cm 10 cm 0,5 cm
For fastening the sub-framework bars on roofs with low height.material: galvanised steel 4 cm 30,7 cm 4,2 cm
For hidden fastening of terraza profiles.screw type: TORX 20material: Stainless steel A4
For hidden fastening of terraza profiles.screw type: TORX 20material: Stainless steel A2
For visible fastening of the starting and end profiles.screw type: TORX 20material: Stainless steel A2
For visible fastening of the starting and end profiles.screw type: TORX 25material: Stainless steel A2
For covering expansion joints against buildings or walls, installed with aluminium cover angle.material: anodised aluminium, dark anodised or black anodised400 cm
Two-part, for covering separating and expansion joints. Fastening of the base profile with customer-provided anchors and screws. Fastening of the cover profile with stainless steel countersunk sheet metal screws.material:cever profile: anodised aluminium, dark anodised or black anodisedbase profile: anodised aluminium400 cm
Two-part, for covering straight or angled edges on terrace floors. Fastening of the base profile with customerprovided anchors and screws. Fastening of the cover profile with stainless steel countersunk sheet metal screws.material:cever profile: anodised aluminium, dark anodised or black anodisedbase profile: anodised aluminium400 cm
For covering the face sides of cut profile edges at roundings.material: anodised aluminium, dark anodised or black anodised400 cm
For covering expansion joints against buildings or walls (installed with alum. wall connection profile) and for covering profile edges cut straight or at an angle.material: anodised aluminium, dark anodised or black anodised400 cm
0,75 l (colourless).For maintenance of WERZALIT terrace surfaces. Freshens up the surface and acts to prevent soiling of heavily used floors.coverage: approx. 10 m2 (75ml/m2) for 1 coat,approx. 5 m2 (150 ml/m2) for 2 coats.Only apply to surfaces that have weathered for at least 1 year.
WERZALIT terrace cleaner is a highly effective liquid cleaner for WERZALIT terrace flooring. It removes thoroughly darkcoloured soiling, spots and films resulting from trees, plants, etc. Residues due to environmental influences are also effectively and thoroughly removed. At the same time, it protects the surface against future soiling.coverage: 10...