Contact us
Call us: +386 (0)1 4305123

0 €0.00

Connections and Couplings

Connection fittings and nozzle holders for all types of pipes (inox, naylon, plastic and copper).

Subcategories

Pressfittings system

PRESSFITTING FOR MISTING SYSTEMS

For more professional systems. Ultraflexible multilayer tube. Thanks to the triple layer, it is more resistant to temperature, abrasion and chemical exposure than traditional naylon pipes.

Working pressure: 200 bar
Explosion pressure: 800 bar
Min. Curving beam: 45 mm
Max. Temperature: 60°C

To pressfitt the connections you have to use hydraulic pressfitting machine that generates the force of 50 kN.

Pressfitting machine

Quick connection

The quick-connection nozzle holders MGF are ideal for the realization of lines even very complex combining also pipes of different material, plastic and copper.

To disassemble the connector, simply hold tight the ring nut and pull the pipe off.

To assure the correct functioning of the connector, you must:

- guarantee the ring nut movement, avoiding any frictions;

- avoid scratches on the pipe or dirty on the internal o-ring.

For copper and plastic pipes from 3/8''.

Connections to tighten with ogive. Without being held in rubber or plastic, ideals realize a very resistant line to the different solicitations due to temperature. Ideals are also for systems that are necessary to satisfy HACCP requirements.

Sort by:

View

There are 49 products.

End line nozzle holder for multilayer tubes (1 connection, 1 nozzle)

1 connector for multilayer tube and 1 connector for a nozzle (180°). Material: Stainless Steel AISI 304 Nozzle Connection: 10/24” UNC Thread on the other side: M4

€12.01

Multilayer tube joint – quick connector

example of use: to connect plastic multilayer to naylon tube

€12.29

Nozzle holder for multilayer tubes (2 connections, 1 nozzle holder)

Press-fitting ferrule for multilayer tubes

Press-fitting ferrule for all the connections for the multilayer tube. Compatible with all press-fitting fittings for multilayer pipe. material: stainless steel AISI 304

€2.83

Nozzle holder for multilayer tubes (2 connections, 1 nozzle holder)

2 connectors for multilayer tubes and 1 connector for a nozzle. Material: Stainless Steel AISI 304 Nozzle Connection: 10/24” UNC Thread on the other side: M4

€17.07

Nozzle holder for multilayer tubes (2 connections, 2 nozzle holder)

2 connectors for multilayer tubes and 2 connectors for nozzles (180°). Material: Stainless Steel AISI 304 Nozzle Connection: 10/24” UNC

€15.51

Multilayer tube joint – 3/8” M

Material: Stainless Steel AISI 304

€13.21

Multilayer tube joint – 1/4” M

Material: Stainless Steel AISI 304

€13.62

End line nozzle holder for multilayer tubes (1 connection, 1 nozzle)

1 connector for multilayer tube and 1 connector for nozzle. Material: Stainless Steel AISI 304 Nozzle Connection: 10/24” UNC

€9.49

Multilayer tube joint – ARM (reverse holander)

Material: Stainless Steel AISI 304

€13.62

Multilayer tube joint – 1/2” F

Material: Stainless Steel AISI 304

€15.89

Multilayer tube joint – 3/8” F

Material: Stainless Steel AISI 304

€15.89

Multilayer tube joint – pump ARF (holander)

Material: Stainless Steel AISI 304

€12.69

End line nozzle holder for 2 nozzles for multilayer tubes (1 connection, 2 nozzls) 180°

1 connector for multilayer tube and 2 connectors for nozzles (180°). Material: Stainless Steel AISI 304 Nozzle Connection: 10/24” UNC

€10.64

TEE for multilayer pipe

3 connectors for multilayer tubes. The TEE fitting is removable and adjustable even after pressing. This makes it easier to dismantle and reposition the line, for example, at the end of the season. To reposition the insert, grease or lubricate the O-ring to prevent damage. Material: Stainless Steel AISI 304

€24.92

Nozzle holder for multilayer tubes (2 connections, 2 nozzle holder) 90°

2 connectors for multilayer tube and 2 connectors for nozzles (90°). Material: Stainless Steel AISI 304 Nozzle Connection: 10/24” UNC

€17.46

End line nozzle holder for 2 nozzles for multilayer tubes (1 connection, 2 nozzls) 90°

1 connector for multilayer tube and 2 connectors for nozzles (90°).Material: Stainless Steel AISI 304Nozzle Connection: 10/24” UNC

€13.75

Multilayer tube joint – 1/8” M

Material: Stainless Steel AISI 304

€14.42

New

Quick connection on the pump 3/8" M with ARM (reverse Hollander)

Example of use: To facilitate the connection of the pump to a multilayer plastic tube.

€19.28

Quick connection on the pump 1/4" M with ARM (reverse Hollander)

Example of use: To facilitate the connection of the pump to a multilayer plastic tube.

€28.66

Joint with 100 bar electrovalve for pressfitting for multilayer tubes (2 connections)

Connection with 100 Bar Electrovalve for Press-Fitting on Multilayer Tubes, 220V AC or 24V DC (2 Connections)

Current: 230V~ / 50Hz AC or 24V DC Working Pressure: 100 Bar Material: Stainless Steel AISI 304

€93.08

Straight Joint with tap pressfitting for multilayer tubes (2 connections)

Straight Joint with Tap Press-Fitting for Multilayer Tubes (2 Connections)
2 Connectors for Multilayer Tube with TapMaterial: Stainless Steel AISI 304

€64.48

Umbrella Nozzle Holder (1 Tube Connection, 3 Nozzles)

Side holder nozzle with 120° corner.It make a fog “umbrella”.nozzle connection: 10/24” UNC

€14.84

Umbrella Nozzle Holder (1 Tube Connection, 4 Nozzles)

Side-mounted nozzle holder with a 90° angle. Creates a fog "umbrella." Nozzle connection: 10/24” UNC

€14.84

4 ways Connector

For 3 additional lines.

€33.92

5 ways connector

For 4 additional lines.

€41.34

Straight Joint

Useful for extending plastic or copper pipelines.

€12.72

3/8" F - quick connector

Example of use: To connect inox to plastic/copper tube

€10.60

Standard Nozzle Holder (2 Connections, 1 Nozzle Holder)

Designed for use in standard misting pipelines. It features 2 connectors for nylon pipes and 1 connector for a nozzle. Nozzle connection: 10/24” UNC

€12.72

TEE Connector

Useful for additional pipeline. For 2 additional lines.

€22.89

Cross Connector

For 3 additional lines.

€32.82

Pipeline ending nozzle holder (1 connection, 1 nozzle)

End Nozzle Holder for Pipeline (1 Connection, 1 Nozzle)

Designed with a side nozzle hole. Nozzle connection: 10/24” UNC

€9.24

L Joint

Useful for tight bending with a small radius (r<250 mm).

€17.81

3 ways Connector

For 2 lines at 90°. (i.e. rooftop)

€32.82

Front Pipeline Ending Nozzle Holder (1 Tube Connection, 1 Nozzle)

Front nozzle holder, suitable for making extensions. Nozzle connection: 10/24” UNC

€9.24

Straight Joint with tap

Useful to branch pipelines. (tap to be moved with pump off).

€25.72

2-Nozzle Holder (2 Connections, 2 Nozzles)

Designed for misting on both sides, such as in farming applications. This nozzle holder has 2 connections and accommodates 2 nozzles at a 180° angle. Nozzle connection: 10/24” UNC

€15.01

3/8" M - quick connector

Example of use: To connect inox to plastic/copper tube

€10.71

Pipeline ending nozzle holder (1 connection, 2 nozzles)

End Nozzle Holder for Pipeline (1 Connection, 2 Nozzles)

End nozzle holder with 2 nozzles at 180° angle. Nozzle connection: 10/24” UNC

€10.40

Joint with 100 bar electrovalve with quick connection

curent: 230V~ / 50Hz or 24VDCworking pressure: 100 bar

€102.05

Standard inox nozzle holder (2 connections, 1 nozzle holder)

2 connectors for inox pipe and one connector for nozzle.material: stainless steel AISI 304nozzle connection: 10/24” UNC

€26.78

Inox and line cap

To put on standard nozzle holder, at the end of the line.material: stainless steel AISI 304

€2.96

Inox L Joint

2 connections for inox pipe.material: stainless steel AISI 304

€28.12

Inox 3/8"M - 8 mm joint

Useful to connect steel to plastic/copper lines.material: stainless steel AISI 304

€25.89

Inox straight joint

2 connections for inox pipe.material: stainless steel AISI 304

€22.77

Inox TEE fitting

3 connections for inox pipe.material: stainless steel AISI 304

€33.51

Standard inox nozzle holder (2 connections, 2 nozzles holder)

2 connections for inox pipe and 2 connections for nozzls 180°.material: stainless steel AISI 304nozzle connection: 10/24” UNC

€33.05

Ogive for INOX fittings

Spare for all fittings. Ogive must be replaced after being pressed (and deformed) the first time.

€5.98

Arches with 7 nozzles to be used in parks

Arches with 7 nozzles for use in parks

Includes: 7x 20 μm nozzles Measurements: 2.5 m (height) Arm extension: 80 cm Base: 200x200x5mm Inlet joint: 1/4" Material: K033 stainless steel tube 48x2.6mm The distance from the ground to the first nozzle holder is 80 cm, and then they are equally spaced from each other.

€950.00

Details View details

Inox pipe 3 m bars with prefabricated nozzle holders

AISI304 pipe for high pressure. Straight bar to make perfect installations. max working pressure: 150 bar max pressure: 500 bar weight of the pipe: 180 g/m (full of water: +38 g/m) thermal stress: 1 mm each 100 m /°C external diameter: 8 mm thickness: 1 mm nozzle connection: 10/24” UNC

€119.91