Pump accessories

Compatible with all our high pressure pumps.

iTTHS timer for STX pumps
iTTHS timer for STX pumps
iTTHS is much more than a timer. Thanks to his experience in misting, we designed a convenient and comprehensive control system, specific for cooling applications, humidification, dedusting and deodorization.- Easy to install, just a few minutes and you're online.- Many indispensable functions not included in the same timer commercial value.- Check at the same time a nebulizer and an auxiliary (discharging valve, dosing pump...).- It detects the pressure of work and shut down the system in case of anomalies.- You can add digital temperature/humidity sensor.- IP55 BOX protected against water and dust.- Industrial screw connectors for wiring.- 32bit Oversized microprocessor.- 3 buttons, 3 led and a big clearly visible display.
€200.51
iTTHS 3 phase timer
iTTHS 3 phase timer
iTTHS is much more than a timer. Thanks to his experience in misting, we designed a convenient and comprehensive control system, specific for cooling applications, humidification, dedusting and deodorization.- Easy to install, just a few minutes and you're online.- Many indispensable functions not included in the same timer commercial value.- Check at the same time a nebulizer and an auxiliary (discharging valve, dosing pump...).- It detects the pressure of work and shut down the system in case of anomalies.- You can add digital temperature/humidity sensor.- IP55 BOX protected against water and dust.- Industrial screw connectors for wiring.- 32bit Oversized microprocessor.- 3 buttons, 3 led and a big clearly visible display.
€874.47
Digital temperature and humidity sensor
Digital temperature and humidity sensor
Sensors produced specifically for humidification and adiabatic cooling.Extended and accurate detection range, thanks to the digital factory pre-calibrated sensor, it does not require calibration.three transmission modes: Analog, Modbus and RTUsupply: 5-24 VDCoutput signals: 0-5 VDC – 1 wirerange temperature: -20/80 °Chumidity range: 0–100% RHcontact capacity: 6A inductive2,5 cm   8 cm    8 cm
€153.47
Digimust - pump management system
DMIST - pump management system
Includes all the functions needed to manage a system:- Stat weekly programmer (management opening hours).- Interface for remote controls (by push button, radio ...).- Interface for industrial automation systems.- Humidity sensor and temperature with heat index calculation.- Setting desired heat index.- Setting the desired humidity.- Ready humidity threshold power fans (relay opt.).- Cyclical timing programmable pump (0-30000 s).- Control dosing pump flavorings / disinfectants.
€795.68
Humidity sensor
Analog humidity sensor
It provides a connection when the relative humidity drops below a manual set level.range detection: relative humidity 40% - 90%commutation: 5% (±1%), response time 5scontact capacity: 1,6A resistiveprotection: IP20conditions: 0-60°Cmediul life: > 50000 cicles
€139.05
Digital Pressure Sensor 0-200 bar
Digital Pressure Sensor 0-200 bar
It provides an analog signal proportional to the pressure, which can be detected by the electronic devices.range detection: 0-200 bar (max pressure 275 bar)precision: ±1%power: 5VDC ±0,1signal: 0,5V = 0 bar; 4,5V = 200 barbody: AISI 316 stainless steelconnection: 1/8”G
€135.80
Inlet digital Pressure Sensor 0-10 bar or 10-100 bar
Inlet digital Pressure Sensor 0-10 bar or 10-100 bar
It provides an analog signal proportional to the pressure, which can be detected by the electronic devices.range detection: 0-10 bar and 10-100 bar (adjustable with screws)contact: NO/NA , 2A max (resistive)body: brass, 1/8”G connection
€64.79
Drain valve KIT
Drain valve KIT
To depressurize the pipe and empty it. It is suggested to be installed to ensure proper operation of the anti-drip valve nozzle.It must be connected to a control device such as ITTHS timer.
€111.39
Dosing pump
Dosing pump
It can be connected directly to the filter. The pressure must be less then 2 bars. It can be used to dose the aromas, desinfection and natural extracts mix to repel insects.The dosing pump can be wired and integrated in the system iControl or iTTHS timer.
€195.63
Arches with 7 nozzles to be used in parks
Arches with 7 nozzles to be used in parks
includes: 7x 20 μm nozzlesmeasurements: 2,5 m (height)extension of the arm: 80 cmbasement: 200x200x5mminlet joint: 1/4"material: K033 stainless steel tube 48x2,6mmThe distance of the first nozzle holder is 80 cm from the ground, then they are fitted equally from each other.
€682.50
Details View details  
Connection KIT for STX pump
Connection KIT for STX pump
KIT includes:2 m plastic braided hose1x M 1/2" - holender element2x two-seater M 1/2"1x F 3/4" - holender element
€59.00
3/8” M damping pipeline end
3/8” M damping pipeline end
Suggested to reduce the pipeline vibrations and noises.Can be installed as a standard pipeline end.
€118.82
Fann CREZA P650 with six 15 μm antidrop nozzles
Fann CREZA P650 with six 15 μm antidrop nozzles
6 nozzles, 90° oscillation, three speeds. Possibility to modify inclination un to 45° from the horizontal.
Misting fan with shovels of high efficiency in degrees to guarantee high speed and air capacity. This realise a very good mixture of air/water and makes it good to use in spaces of big dimensions where it is necessary to reach important distances.
€529.39
Fann CREZA D with eight 15 μm antidrop nozzles
Fann CREZA D with eight 15 μm antidrop nozzles
Air diffuser under way profile: ideal for destratification and improves evaporation
Nozzle position: avoids any fall of drops
Hooks and supplied chains of series: simple installation
Paint job to black powder: elegant and discreet
€1,693.73
Fann NELTEMI without shutter
Fan NELTEMI without shutter
Fan for Agriculture and Industry.
Line of realized industrial fans in stainless steel and with motoriductor in a position to developing remarkable air exchanges. These fans are supplied without nozzles in order to have the maximum flexibility. For example it is possible to install window fans and nozzles in line inside the room.
€801.00
Fann NELTEMI with shutter and winter isolation
Fann NELTEMI with shutter and winter isolation
Fan for Agriculture and Industry.
Line of realized industrial fans in stainless steel and with motoriductor in a position to developing remarkable air exchanges. These fans are supplied without nozzles in order to have the maximum flexibility. For example it is possible to install window fans and nozzles in line inside the room.
€861.70