Teakwood umbrella max. R 3,5 m or 3,3 x 3,3 m
shape:
round or square
frame:
8 ribs
Untreated teak
Continuous pole Ø 48 mm
Stainless steel fittings on rib ends
Fabric corners reinforced with leather
function:
Pulley system for opening and closing
Fixed with a metal pin
The runner can be fixed at various heights for optimum fabric tension
Leather flaps for stowing the rope
frame colour:
Fine teak
flounce:
Only available without
protective cover:
Included in delivery
important:
The wood is supplied in a natural, untreated state.
The wood may secrete colourings and its own natural oils, which may leave residues on a light-coloured cover.
This cannot be avoided and is therefore not admissible as a complaint.
shade cover:
self-tautening thanks to the flexible rod ends, available in materials:
Class 4 (100 % polyester, approx. 250 g/m²),
Class 5 (100 % polyacrylic, approx. 300 g/m²).
Video presentation
Material class 4 (100 % polyester approx. 250 g/m²)
Material class 5 (100 % polyacrylic approx. 300 g/m²)
Specification
Loose cover max. 10 cm, concrete thickness min. 30 cm (pay attention to frost depth), guarantee water drainage.
The listed measures represent extrapolated average values that may differ slightly from the product (±2% ±5 cm). The height dimensions are based on the ground socket PX. In the base variations, these might differ slightly. Apart from the steel base, minus 7,5 cm. For the variants with a mounting plate and an M4 support tube, the specified heights are reduced by 12–13 cm. The max. Wind speed limits per our separate list apply only when a fixed ground anchorage is present. A base with the specified minimum weight is not sufficient. In the presence of several parasols, the minimum distance between one parasol and another and between parasols and walls shall be 20 cm.
