Burda Relax Glass infrared heater
protection: IP65 - dust-tight, protected against water jets from any direction
colour: glass/casing black/black, black/silver or white/silver (3000 W black/black only)
power: 2200 or 3000 W
current: 9.6 A or 13 A
lamp type: halogen, polished aluminium reflector, SCHOTT NEXTREMA® ceramic glass front
control: on/off switch on the side
power cord: 1.8 m with plug for an earthed socket
voltage: 230-240 V, 50 Hz, single phase
bracket: wall and ceiling brackets included (2200 W wall only)
8 cm
90 cm
17 cm
5.1 kg
Dimensions and weight of the 2200 W version. The 3000 W version measures 12.8 × 128.6 × 17 cm (depth × width × height) and weighs 6.9 kg.
Burda Relax Glass is an infrared heater with a tinted ceramic glass front. It gives instant heat and looks calm on the wall.
Its discreet, stylish design suits elegant outdoor places such as private patios, rooftop lounges and restaurant terraces. It is a shortwave infrared heater: the heat is there the moment you switch it on.
The front is high-resistance SCHOTT NEXTREMA® ceramic glass that reduces the light. You choose white or black glass and a silver or black casing in powder-coated aluminium. Inside is a halogen lamp with a polished aluminium reflector. The filament reaches up to 2100 °C.
Outdoors the power you need depends a lot on wind, location and use. As a rough guide Frico gives 300 to 500 W/m² for an area with three walls and 500 to 800 W/m² for less protected or open areas. Comfort is best when the heat comes from at least two directions.
You switch the heater on and off with the switch on its side. For timed operation add the Burda CBT timer, for app and remote control the Burda IHBD3 comfort controller BT. For a heater with remote control and three heat steps choose the Burda Relax Glass Dimmer infrared heater, for a smart home the Burda Relax Glass io infrared heater.
Mount the heater horizontally on a wall or ceiling with the two brackets in the box. The 2200 W version is for wall mounting only. You set the angle in fixed positions: 0°, 15° or 30° on a ceiling, 15°, 30° or 45° on a wall. Recommended height: 2 to 3 m. Minimum height from the floor: 2.1 m. Keep at least 1 m to surfaces such as table tops. The heater has a 1.8 m cord with plug for an earthed socket.
Accessories: the Burda Relax Glass bracket, 2 pieces as spare or extra brackets, the Burda Relax Glass decorative stripe in black or silver and the Burda Relax Glass spare lamp.
Technical data
| Frico codes | IHRG22BB65, IHRG22BS65, IHRG22WS65, IHRG30BB65 |
| Max. filament temperature | 2100 °C |
| Mounting height | 2 to 3 m |
| Min. mounting height | 2.1 m |
| Min. distance to surfaces (e.g. table tops) | 1 m |
| Tilt | ceiling 0°, 15° or 30°, wall 15°, 30° or 45° |
| Power | Glass / casing | Frico code | Current | Width × height × depth | Weight |
|---|---|---|---|---|---|
| 2200 W | Black/Black | IHRG22BB65 | 9.6 A | 900 × 170 × 80 mm | 5.1 kg |
| 2200 W | Black/Silver | IHRG22BS65 | 9.6 A | 900 × 170 × 80 mm | 5.1 kg |
| 2200 W | White/Silver | IHRG22WS65 | 9.6 A | 900 × 170 × 80 mm | 5.1 kg |
| 3000 W | Black/Black | IHRG30BB65 | 13 A | 1286 × 170 × 128 mm | 6.9 kg |
You choose the colour and power on this page. The first price shown is for the cheapest version.
Colours
Black/Black (black glass, black casing), Black/Silver (black glass, silver casing), White/Silver (white glass, silver casing)
