Maxi umbrella max. R 5.6 m

Video presentation

Fabric type

Our goal is to produce the best quality products. For this reason we use only prime grade materials and the best fabrics for outdoor use.

Acrylic fabric ecru - specially developed for outdoor use (290 g/m²)
A special treatment makes it water-repellent and protects it from stains. The only colour available is ecru.

Solution dyed acrylic fabric (Sunbrella) - the best coloured fabric for outdoor use (280 g/m²)
The colour is added while the fibre is produced. This gives the fabric high resistance to UV rays, even in aggressive environments with chlorine or salt. The colours do not fade and stay stable for a long time, and the fabric also resists moisture. A special treatment makes it water-repellent and protects it from stains. Regular brushing keeps its original look. UPF 50+ (UV protection factor).

Solution dyed acrylic fabric - special colours (Sunbrella) - the best coloured fabric for outdoor use (280 g/m²)
The colour is added while the fibre is produced. This gives the fabric high resistance to UV rays, even in aggressive environments with chlorine or salt. The colours do not fade and stay stable for a long time, and the fabric also resists moisture. A special treatment makes it water-repellent and protects it from stains. Regular brushing keeps its original look. UPF 50+ (UV protection factor).

Micro-mesh fabric - the best solution for windy areas (500 g/m²)
The micro-mesh structure lets air circulate naturally and still gives pleasant shade. The composition of the fibres keeps the colours fast and the fabric resistant to moisture for a long time. Regular cleaning with water and neutral soap keeps the fabric in good condition for a long time.

Airfim fabric - fully waterproof (200 g/m²)
The fabric coating together with special stitching gives full protection against rain and stops water from passing through the seams. A stain treatment gives high resistance to dirt. UPF 80 (UV protection factor).

Frame colours

Maxi comes in three frame versions: powder coated aluminium in silver (SILV), graphite (GRAF) or white (BIAN). All three cost the same. The colours in the picture may differ from the real ones.

Specification

• Frame: powder coated aluminium in silver (SILV), graphite (GRAF) or white (BIAN). Ribs in aluminium, screws in stainless steel.
• Ribs: you can replace each rib on its own, without taking the umbrella apart. The canopy comes off for maintenance or replacement.
• Opening: with a crank. The telescopic mechanism closes the umbrella even with tables and chairs underneath.
• Shapes and sizes: square 400 x 400 cm, octagonal Ø 560 cm.
• Canopy: without flounce. The acrylic, solution dyed acrylic and Airfim canopies have a vent, Micro-mesh has none. A flounce in solution dyed acrylic is available on request, extra charge 238 EUR excl. VAT.
• The base is sold separately. Minimum recommended ballast on the base: 200 kg.
• Packaging: 2 packages, 36.5 kg, 0.21 m³.
• Bases: freestanding base ALU 4 80 x 80 cm with or without covers, ground insert base with 13 cm extension and surface mount plate 30 x 30 cm with 13 cm extension. Fix the plate with 4 chemical anchors, not supplied. Wheels for the base ALU 4 (4 pcs) are available as an accessory.
• Ballast: the base ALU 4 takes 12 concrete tiles 40 x 40 x 4 cm (15 kg). For a covered base you need 4 aluminium covers 40 x 40 cm. You can also use a decorative vase 40 x 40 x 40 cm as ballast, and a cube of the same size works as a seat.
• Heaters: set of 2 heaters, 2000 W, 220 V, IPX5, with a bracket for the ribs. Each one heats about 12 to 15 m².
• LED lamp Stick: LED strip 60 cm long, 2.4 W, 240 lumen, about 6 hours of use, lithium battery charged by USB, charger included. You fix it on a rib with 3 screws.
• Protective cover: grey Airfim with zip and telescopic stick, 273 EUR excl. VAT. You fit it on the mounted and closed umbrella.

Dimensions

The table shows the measures in cm for both sizes, and you find the letters on the base drawings below it.