Point Neck table Ø 30 cm
The Neck table with a Ø 30 cm base is a low table, 49.5 cm high without the top. A compact concrete base carries a powder-coated aluminium column. You choose a round top of Ø 50 or Ø 60 cm in HPL, porcelain, natural teak or TechTeak. Adjustable feet let you level it on different outdoor surfaces.
material: concrete, aluminium, HPL, porcelain, natural teak or TechTeak top
frame colour: 34 Mineral White, 56 Gunmetal Grey
base: concrete
top size: choose under “Top size”: Ø 50 cm or Ø 60 cm or without top
table top: choose under “Table top”: HPL 10 mm (6 colours), natural teak 25 mm, porcelain 12 mm (7 colours) or TechTeak 27 mm, the first price shown is without top
frame colour and top colour: write your choice in the order note
protective cover: choose under “Protective cover”, the first price shown is without it
base dimensions (without top): Ø 30 x H 49.5 cm
weight: 21 kg, without top
Ø 30 cm
49.5 cm
21 kg with packaging
Technical data
- volume with packaging: 0.13 m³ (without top)
- base: concrete, porous, textured finish
- column: powder-coated aluminium
- frame colours: 34 Mineral White, 56 Gunmetal Grey
- feet: adjustable
- top sizes: Ø 50 cm or Ø 60 cm
- HPL top: 10 mm, 96 Solid White, 95 Marbled White, 99 Capri White, 98 Dune Beige, 97 Marbled Grey, 94 Black
- porcelain top: 12 mm, 81 Natural White, 85 Veined Off White, 90 Pale Travertine, 89 Caliza, 88 Terrazzo Grey, 87 Ochre Grey, 86 Basalt Grey
- natural teak top: 25 mm, grade A teak, FSC certified
- TechTeak top: 27 mm
- porcelain tops: do not place tables with porcelain tops together, the edges can chip, for tables placed together Point recommends HPL
- protective cover: cut for the base with its top
- code: 79758
The Milan studio Meneghello Paolelli designed the Neck collection: two sculptural table bases for any space, above all for contract and outdoor use. The starting point was the bistro table, with its clearly defined ergonomic limits. Three materials meet in the design: a concrete base, a powder-coated aluminium column and a top in teak, HPL or porcelain. Aluminium and concrete join halfway up, where a smooth, coloured surface turns into a porous, rough one. Sandro Meneghello and Marco Paolelli, both born in Milan in 1979, founded the studio in 2006. It has won 13 Red Dot awards, one of them a Best of the Best, seven Design Plus awards, three Good Design awards, eight ADI Design Index awards, four special mentions at the German Design Awards and three iF Design Awards.
Under “Top size” on this page you choose the top size: Ø 50 cm or Ø 60 cm. Under “Table top” you choose the material: HPL 10 mm (6 colours), natural teak 25 mm, porcelain 12 mm (7 colours) or TechTeak 27 mm. If you choose “Without top” in both, you buy the base only. The first price shown is without a top. Pick the colour of an HPL or porcelain top from the top colour chart below and write its code in the order note. Point advises against placing tables with porcelain tops together, as contact or friction can chip the edges. For tables placed together Point recommends HPL tops.
The aluminium frame comes in 34 Mineral White or 56 Gunmetal Grey, the base is concrete. Pick the frame colour from the colour chart below and write it in the order note.
Under “Protective cover” you choose “Without protective cover” or “With protective cover”. The first price shown is without the cover. The cover is beige polyester with an acrylic lacquer and it is waterproof. The cover is cut for the base with its top.
You find every piece of the collection in Neck and the full Point range in Outdoor furniture.
Frame colour
Top colours
Video
Technical drawing
