Ocean Master M1 Classic Cantilever up to R 3.4 m or 3 x 3 m

Name: Ocean Master M1 Classic Cantilever up to R 3.4 m or 3 x 3 m
Brand: Tuuci
SKU: OMCL
Price: 6445.00 EUR
Availability: InStock

Tuuci Ocean Master M1 Classic Cantilever

Ocean Master M1 Classic Cantilever is a side post parasol. You can service every part. You choose from 5 sizes, from 245 x 245 cm to 245 x 365 cm.

frame: side mast, polished titanium hub
lift: manual piston assisted, non-telescoping
sizes: square 245 x 245 and 300 x 300 cm, octagon R 275 and R 340 cm, rectangle 245 x 365 cm
frame colours: Polished Titanium, 8 powder coats, 6 Plantation Aluma-Teak
fabric: Marine MXT level C, Premier PXT level E
Softscape: 23 printed patterns (surcharge)
code: OMCL

Description

Technical data

frame: cantilever parasol with a side mast
standard features: security stem, single wind vent in the canopy colour (contrasting on request), market cut profile, polished titanium hub, Venice finial.
sizes:
- OMCL8.0SQ: 245 x 245 cm, square, minimum anchor weight 90 kg, cover SC2/CC2
- OMCL10.0SQ: 300 x 300 cm, square, minimum anchor weight 127 kg, cover SC2/CC2
- OMCL9.0OCT: R 275 cm, octagon, minimum anchor weight 90 kg, cover SC2/CC2
- OMCL11.0OCT: R 340 cm, octagon, minimum anchor weight 127 kg, cover SC2/CC2
- OMCL8X12RECT: 245 x 365 cm, rectangle, minimum anchor weight 127 kg, cover SC2/CC2
fabric: all Marine MXT series (level C) are included. Premier PXT (level E) costs extra. The surcharge does not apply to frame colour, lift or lighting. You find the fabric colours below.
frame colours: Polished Titanium (standard). Powder coat, 8 colours (Silver Sand, Glacier White, Sandbar, Oyster, Night Fog, Espresso, Graphite, Black Sea). Plantation Aluma-Teak, 6 finishes (Aspen White, Cypress, Driftwood, Weathered, Natural, Java).
lift: the Manual Piston Assisted Lift is included. The mast is not telescoping, so the canopy may not close over a table.
lighting and heating: not available for this model.
ordered separately (accessories):
- protective covers (the code is listed with each size):
  - Custom protective cover CC2
  - Standard protective cover, dark grey polyester SC2
- anchors and mounts:
  - G-MAX Plate square anchor (GV)
  - Full Aluma-Crete cube anchor (AGSP)
  - Half Aluma-Crete cube anchor (AGSP2)
  - Full cube cushion for the cube anchor (AGSP-FCC)
  - Half cube cushion for the half cube anchor (AGSP2-HCC)
  - MAX aluminium extension cover (BASE-EXTCV)
  - MAX in-ground security mount for new concrete (IGSM)
  - MAX stainless steel surface anchor for existing concrete (MAXPLATE)
  - MAX stainless steel extension (BASE-EXT)
- replacement canopy:
  - Replacement canopy for Ocean Master MAX and M1 cantilevers

Extras on request
contrasting binding on canopy and vent
15 cm accent border on the canopy
valance (straight, scalloped, classic or modern Roman)
15 cm cord fringe
contrasting welt
logo printing on the canopy: project set up (1 colour, logo up to 90 cm), printing per canopy panel, conversion of the logo to vector artwork
canopy cleaning, shipping not included
your own fabric or a fabric outside the Tuuci range (COM)
Prices exclude VAT.

Fabrics

Marine MXT 9000-9600, price level C (included)
For commercial and private use, in extreme and moderate conditions. This acrylic series has the largest choice of colours and the longest warranty, and you get it on most products. A fishtail profile needs flat binding. A valance needs braid binding.

Marine MXT 9800, price level C (included)
A two-ply polyester fabric with a resin coating. The canopy is two-tone as standard: white underneath, the coloured coating on top. Often used on the Ocean Master M1 Manta.

Marine MXT 9700, price level C (included)
A polyester fabric with a good balance of strength and weight. Tuuci chose it for the Ocean Master MEGA MAX, and you get it on many other collections too.

Premier PXT 10000, price level E (at extra cost)
The most durable textile in the range, made for constant extreme exposure. It repels water very well and has very high tensile strength. It is a standard canopy option on the Ocean Master MAX F-1.

Premier PXT 10000-92, price level E (at extra cost)
A very strong fabric with an open weave. It suits places with strong wind where you do not need 100 % shade and water resistance. The open weave ratio is 4 %. It is a standard canopy option on the Ocean Master MAX F-1 and is recommended for the Stingray.

Premier PXT 10000-86, price level E (at extra cost)
A very strong fabric with an open weave. It suits places with strong wind where you do not need 100 % shade and water resistance. The open weave ratio is 14 %. It is a standard canopy option on the Ocean Master MAX F-1 and is recommended for the Stingray.

Softscape, printed canopy pattern
Tuuci Softscape is a pattern printed on the canopy. You choose from 23 patterns in 6 themes. Tropical: Belize, Tulum, Tahiti, Kauai. Florals: Adelaide, Lucia, Primrose, Kaleidoscope. Maritime: Gulfstream, Reef, Dockside. Whimsical: Wonder, Tamarin, Plume, Fable. Wildlife: Savanna, Prowl, Safari. Abstract: Web, Doodle, Ripple, Trace, Prism. You get it in 1 or 2 colours, with or without a valance. The surcharge depends on the size. In the shop you select it with the Polished Titanium frame and level C fabric. We quote other combinations on request.

Standard frame

Powder coated frame

Plantation Aluma-Teak frame

Ocean Master M1 Classic Cantilever
The M1 Classic Cantilever brings beauty, premium performance and durability. You can service every part. Its scale suits canopies up to 340 cm across or a 245 x 365 cm rectangle.

It comes in 5 sizes: a 245 or 300 cm square, an R 275 or R 340 cm octagon and a 245 x 365 cm rectangle. You open the parasol by hand with a piston assisted lift. The mast is not telescoping, so the canopy may not close over a table.