Burda Relax Glass io infrared heater
protection: IP65 - dust-tight, protected against water jets from any direction
colour: glass/casing black/black, black/silver or white/silver
power: 2200 or 3000 W, each in 3 steps
current: 9.6 A or 13 A
lamp type: halogen, polished aluminium reflector, SCHOTT NEXTREMA® ceramic glass front
control: Somfy io-homecontrol®, remote control IORC sold separately, 1/3, 2/3 or full power
power cord: 1.8 m with plug for an earthed socket
voltage: 230-240 V, 50 Hz, single phase
bracket: wall and ceiling brackets included (2200 W wall only)
15.5 cm
90 cm
17 cm
5.3 kg
Dimensions and weight of the 2200 W version. The 3000 W version is 128.6 cm wide and weighs 7.1 kg.
Burda Relax Glass io is the Relax Glass infrared heater ready for your smart home. It works with Somfy io-homecontrol®.
Its discreet, stylish design suits elegant outdoor places such as private patios, rooftop lounges and restaurant terraces. It is a shortwave infrared heater: the heat is there the moment you switch it on.
The front is high-resistance SCHOTT NEXTREMA® ceramic glass that reduces the light. You choose white or black glass and a silver or black casing in powder-coated aluminium. Inside is a halogen lamp with a polished aluminium reflector. The filament reaches up to 2100 °C.
Through io-homecontrol® you control the heater together with other connected devices such as blinds, roof windows and garage doors. You can also set up scenarios like "Leaving home" that switch everything off with one tap.
You control the heater with a Somfy remote control, sold separately as the Burda Relax Glass io remote control IORC. The 1-channel version controls one or more heaters, the 5-channel version also groups and other devices. You set 1/3, 2/3 or full power. If your existing io-homecontrol® remote has a free channel, you can add the heater to it. The on/off switch sits on the right side.
Outdoors the power you need depends a lot on wind, location and use. As a rough guide Frico gives 300 to 500 W/m² for an area with three walls and 500 to 800 W/m² for less protected or open areas. Comfort is best when the heat comes from at least two directions.
Mount the heater horizontally on a wall or ceiling with the two brackets in the box. The 2200 W version is for wall mounting only. You set the angle in fixed positions: 0°, 15° or 30° on a ceiling, 15°, 30° or 45° on a wall. Recommended height: 2 to 3 m. Keep at least 1 m to surfaces such as table tops. The heater has a 1.8 m cord with plug for an earthed socket.
Accessories: the Burda Relax Glass bracket, 2 pieces as spare or extra brackets, the Burda Relax Glass decorative stripe in black or silver and the Burda Relax Glass spare lamp.
Technical data
| Frico codes | IHRGIO22BB65, IHRGIO22BS65, IHRGIO22WS65, IHRGIO30BB65, IHRGIO30BS65, IHRGIO30WS65 |
| Max. filament temperature | 2100 °C |
| Mounting height | 2 to 3 m |
| Min. distance to surfaces (e.g. table tops) | 1 m |
| Tilt | ceiling 0°, 15° or 30°, wall 15°, 30° or 45° |
| Power | Glass / casing | Frico code | Current | Width × height × depth | Weight |
|---|---|---|---|---|---|
| 2200 W | Black/Black | IHRGIO22BB65 | 9.6 A | 900 × 170 × 155 mm | 5.3 kg |
| 2200 W | Black/Silver | IHRGIO22BS65 | 9.6 A | 900 × 170 × 155 mm | 5.3 kg |
| 2200 W | White/Silver | IHRGIO22WS65 | 9.6 A | 900 × 170 × 155 mm | 5.3 kg |
| 3000 W | Black/Black | IHRGIO30BB65 | 13 A | 1286 × 170 × 155 mm | 7.1 kg |
| 3000 W | Black/Silver | IHRGIO30BS65 | 13 A | 1286 × 170 × 155 mm | 7.1 kg |
| 3000 W | White/Silver | IHRGIO30WS65 | 13 A | 1286 × 170 × 155 mm | 7.1 kg |
You choose the colour and power on this page. The first price shown is for the cheapest version.
Colours
Black/Black (black glass, black casing), Black/Silver (black glass, silver casing), White/Silver (white glass, silver casing)
Dimension drawing
