Walls

The Egoé LEVA walls close individual bays of a module and decide where the space stays open and where it is screened. You choose between slat, fabric, glass and sound insulating walls, blackboards, climbing walls, a banner wall and a wall with a sliding door. Some walls also carry a planter, a table or a whiteboard.

Egoe LEVA fabric wall, Kortexin
New
Egoe LEVA fabric wall, Kortexin
The fabric wall closes one bay of a LEVA module and screens it from wind and from view. The canvas is waterproof polyester, the fittings are stainless steel and the wall attaches with velcro. It weighs 2 kg, so you take it down and store it in a few minutes.

structure: water-resistant polyester outdoor canvas, stainless steel fittings, velcro attachment
material: water-resistant Kortexin polyester fabric
dimensions: 206 x 224 cm
weight: 2 kg
design: Egoé studio
item code: LEV410-000000
€165.00
Egoe LEVA blackboard wall with climbing holds, plywood
New
Egoe LEVA blackboard wall with climbing holds, plywood
The blackboard wall with climbing holds closes a LEVA bay and turns it into a play surface. The front is 18 mm outdoor plywood finished with blackboard paint and fitted with six climbing holds, and the back is 9 mm black outdoor plywood. The frame is larch treated with colourless oil.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: on request, 22 standard RAL shades
dimensions: 198 x 221.5 x 7.6 cm
weight: 109 kg
climbing holds: 6 pieces
design: Egoé studio
item code: LEV420-000000
€1,588.00
Egoe LEVA half-size blackboard wall with climbing holds, plywood
New
Egoe LEVA half-size blackboard wall with climbing holds, plywood
The half-size blackboard wall with climbing holds covers half a LEVA bay. The front is 18 mm outdoor plywood finished with blackboard paint and fitted with three climbing holds, and the back is 9 mm black outdoor plywood. Use it next to a half wall or beside the entrance to the cube.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: on request, 22 standard RAL shades
dimensions: 99 x 221.5 x 7.6 cm
weight: 56.5 kg
climbing holds: 3 pieces
design: Egoé studio
item code: LEV425-000000
€813.00
Egoe LEVA climbing wall, plywood
New
Egoe LEVA climbing wall, plywood
The climbing wall closes a LEVA bay and turns it into a climbing surface. The front is 18 mm outdoor plywood with pre-drilled M10 threaded holes and thirty climbing holds, and the back is 9 mm black outdoor plywood. Move the holds and the route changes.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: on request, 22 standard RAL shades
dimensions: 198 x 221.5 x 7.6 cm
weight: 121 kg
climbing holds: 30 pieces, M10 threaded holes
design: Egoé studio
item code: LEV430-000000
€2,614.00
Egoe LEVA half-size climbing wall, plywood
New
Egoe LEVA half-size climbing wall, plywood
The half-size climbing wall covers half a LEVA bay. The front is 18 mm outdoor plywood with pre-drilled M10 threaded holes and fifteen climbing holds, and the back is 9 mm black outdoor plywood. It suits smaller layouts and younger children.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: on request, 22 standard RAL shades
dimensions: 99 x 221.5 x 7.6 cm
weight: 57.5 kg
climbing holds: 15 pieces, M10 threaded holes
design: Egoé studio
item code: LEV435-000000
€1,299.00
Egoe LEVA sound insulating wall, recycled rubber
New
Egoe LEVA sound insulating wall, recycled rubber
The sound insulating wall closes a LEVA bay and cuts the noise inside. The front is 18 mm outdoor plywood with a recycled rubber absorber covered in fabric, the back is 9 mm black outdoor plywood, and the frame is wooden. It helps beside a busy road or between work places.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood, recycled rubber absorber
dimensions: 198 x 221.5 x 7.8 cm
weight: 134 kg
item code: LEV440-000000
€1,413.00
Egoe LEVA half-size sound insulating wall, recycled rubber
New
Egoe LEVA half-size sound insulating wall, recycled rubber
The half-size sound insulating wall covers half a LEVA bay. The frame is larch, the front is 18 mm outdoor plywood with a recycled rubber absorber covered in geltex, and the back is 9 mm black outdoor plywood. You combine it with the other half-size walls of the system.

structure: larch frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood, recycled rubber absorber
dimensions: 99 x 221.5 x 7.8 cm
weight: 68 kg
item code: LEV445-000000
€726.00
Egoe LEVA banner wall, PVC
New
Egoe LEVA banner wall, PVC
The banner wall carries a printed banner in a LEVA bay. The banner is outdoor mesh, hung and tensioned with steel elements and a rubber cord. It works for signage, sponsors or information at a fair, a festival or in public space.

structure: steel hanging and tensioning elements, rubber cord
material: PVC, printed outdoor mesh
dimensions: 211 x 198 x 0.2 cm
weight: 8.4 kg
printing of the banner is not included in the price and is quoted separately from the print data
design: Egoé studio
item code: LEV450-002000
€260.00
Egoe LEVA slat wall, larch
New
Egoe LEVA slat wall, larch
The slat wall closes a LEVA bay with a run of larch slats. The frame is powder-coated aluminium alloy and the fasteners are stainless steel. The slats block the view and let air through, so the space stays ventilated.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch
structure colour: on request, 22 standard RAL shades
dimensions: 192.9 x 3.5 x 224 cm
weight: 52 kg
design: Egoé studio
item code: LEV460-M12000
€1,111.00
Egoe LEVA two-thirds size slat wall with wooden planter, larch
New
Egoe LEVA two-thirds size slat wall with wooden planter, larch
The two-thirds size slat wall with wooden planter combines screening and planting in one LEVA bay. The upper part is larch slats in a powder-coated aluminium frame, and below sits a planter with wooden cladding and three galvanised inner pots. The wall stands 158.1 cm high.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel planter with larch cladding, three galvanised inner pots
material: larch
structure colour: on request, 22 standard RAL shades
dimensions: 200.5 x 21.2 x 158.1 cm
weight: 58 kg
planter: uses the LEV200 pots
design: Egoé studio
item code: LEV461-M12000
€1,437.00
Egoe LEVA two-thirds size slat wall with metal planter, larch
New
Egoe LEVA two-thirds size slat wall with metal planter, larch
The two-thirds size slat wall with metal planter is the version with a smooth sheet metal planter face. The upper part is larch slats in a powder-coated aluminium frame, and below sits a steel planter with three galvanised inner pots. The wall stands 158.1 cm high.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel planter with steel sheet cladding, three galvanised inner pots
material: larch
structure colour: on request, 22 standard RAL shades
dimensions: 200.5 x 21.2 x 158.1 cm
weight: 57 kg
planter: uses the LEV201 pots
design: Egoé studio
item code: LEV462-M12000
€1,511.00
Egoe LEVA one-third size slat wall with integrated table, larch
New
Egoe LEVA one-third size slat wall with integrated table, larch
The one-third size slat wall with integrated table offers screening and a work surface in one element. The wall is larch slats in a powder-coated aluminium frame, the table structure is zinc coated and powder coated steel, and the top is HPL. The table stands 64 cm high and suits bench seating.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel table structure
material: larch, HPL table top
structure colour: on request, 22 standard RAL shades
dimensions: 200.5 x 77 x 64 cm
weight: 61 kg
design: Egoé studio
item code: LEV463-M12000
€1,601.00
Egoe LEVA half-size slat wall with integrated bar table, larch
New
Egoe LEVA half-size slat wall with integrated bar table, larch
The half-size slat wall with integrated bar table sets a counter into the edge of a LEVA module. The wall is larch slats in a powder-coated aluminium frame, the table structure is zinc coated and powder coated steel, and the top is HPL. The counter stands 110 cm high and is made for standing use.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel table structure
material: larch, HPL table top
structure colour: on request, 22 standard RAL shades
dimensions: 200.5 x 38 x 110 cm
weight: 59 kg
design: Egoé studio
item code: LEV464-M12000
€1,537.00
Egoe LEVA half-size slat wall, larch
New
Egoe LEVA half-size slat wall, larch
The half-size slat wall covers half a LEVA bay. The slats are larch, the frame is powder-coated aluminium alloy and the fasteners are stainless steel. Use it beside an entrance or where only part of a side needs screening.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch
structure colour: on request, 22 standard RAL shades
dimensions: 94.5 x 3.5 x 224 cm
weight: 26 kg
design: Egoé studio
item code: LEV465-M12000
€553.00
Egoe LEVA slat wall with integrated whiteboard, larch
New
Egoe LEVA slat wall with integrated whiteboard, larch
The slat wall with integrated whiteboard brings a writing surface into a LEVA module. The wall is larch slats in a powder-coated aluminium frame, and the board is dibond. It is used in LEVA Office layouts and in outdoor classrooms.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch, dibond whiteboard
structure colour: on request, 22 standard RAL shades
dimensions: 192.9 x 3.5 x 224 cm
weight: 81.4 kg
design: Egoé studio
item code: LEV466-M12000
€1,501.00
Egoe LEVA strap wall, polyester
New
Egoe LEVA strap wall, polyester
The strap wall closes a LEVA bay with horizontal polyester straps. The straps fix with velcro onto aluminium alloy bars, and the fittings are stainless steel. The wall weighs 9 kg and you move it without tools.

structure: aluminium alloy bars, stainless steel, velcro attachment
material: polyester straps
dimensions: 198.7 x 4 x 224 cm
weight: 9 kg
design: Egoé studio
item code: LEV470-000000
€617.00
Egoe LEVA glass wall, glass
New
Egoe LEVA glass wall, glass
The glass wall closes a LEVA bay and keeps the view open. It combines printed tempered safety glass, rubber seals and stainless steel fasteners. It is used in LEVA Office layouts, where the space stays bright and sheltered from wind.

structure: rubber seals, stainless steel fasteners
material: printed tempered safety glass
dimensions: 216.1 x 222 cm
weight: 105 kg
design: Egoé studio
item code: LEV480-002500
€665.00
Egoe LEVA wall with sliding door, larch
New
Egoe LEVA wall with sliding door, larch
The wall with sliding door closes a LEVA module and still lets you open it. The lower part is a slat wall, the upper part is clear polycarbonate, and the sliding door has a cylinder lock. Use it where the space has to be locked at the end of the day.

structure: slatted half-wall with clear polycarbonate, sliding door with a cylinder lock
material: larch, clear polycarbonate
dimensions: 200.2 x 224 cm
weight: 53 kg
design: Egoé studio
item code: LEV490-M12000
€1,469.00