Contact us
Call us: +386 (0)1 4305123

0 €0.00

LEVA

The LEVA is "the most sophisticated bunker prototype", a modular system consisting of a basic cube and accessories. In the private sphere it makes children's playrooms with a climbing wall or a blackboard, outdoor daybeds with suspended beds, dining areas from several combined cubes, and kitchen spaces for outdoor cooking with herb planters. Companies use it for outdoor offices with folding work desks and partitions, festival pergolas, exhibition and display spaces and cinemas.

LEVA uses weather-resistant materials: larch or acacia structural beams, galvanized steel joints with a powder-coat finish, outdoor plywood and outdoor textiles, all with minimal maintenance.

The design is minimalist - light, airy and functional. It is easy to assemble and usually needs no ground anchoring.

Subcategories

Cubes

The cubes are the basic modules of the Egoé LEVA system. The base bay measures 216.5 x 216.5 cm, and from it you build a single, double, triple, L-shaped or quadruple layout. The frame is larch beams with powder-coated metal corner brackets, or all steel with zinc and powder coating. Roofs, walls, benches, planters and accessories all fix to the cube.

Planters

The Egoé LEVA planters close an open bay of a module and turn it into a green wall. The steel structure is zinc coated and powder coated, and the cladding is larch boards or steel sheet. Each planter holds three galvanised inner pots.

Benches and daybeds

The Egoé LEVA benches and daybeds fit into the sides of a cube and become a fixed part of the structure. You choose between wooden benches in steamed robinia, thermo ash or jatoba, upholstered benches with Dryfeel foam and outdoor fabric, and a hanging daybed. The steel structures are zinc coated and powder coated.

Roofs

The Egoé LEVA roofs cover a module and decide how much sun and rain it lets through. The range runs from a light shading mesh and a folding canvas to slat, glass, green and solid roofs with polycarbonate or sandwich panels. They all fix to the same module, so the cover can be changed later.

Walls

The Egoé LEVA walls close individual bays of a module and decide where the space stays open and where it is screened. You choose between slat, fabric, glass and sound insulating walls, blackboards, climbing walls, a banner wall and a wall with a sliding door. Some walls also carry a planter, a table or a whiteboard.

Floors

The Egoé LEVA floors close the plan of a module and set it on a level base. You choose between a wooden floor of larch boards with an oil nano-coating and a concrete floor with 500 x 500 mm tiles on a steel frame. Each version comes in a full and a half bay size.

Outdoor kitchens

The Egoé LEVA outdoor kitchens fit into the side of a module and bring the cooking outdoors. The steel structures are zinc coated and powder coated, and the worktops are solid steamed robinia. The range runs from a single-sided worktop with a grill to a double-sided kitchen with gas stoves, a sink and a built-in ONEQ Glow grill, completed by a utensils holder and two waste bins.

Tables

The Egoé LEVA tables fit between two bays of a module or along its side. The steel structures are zinc coated and powder coated, and the tops are solid wooden slats, solid planks or HPL. For the wooden tops you choose between steamed robinia, thermo ash and jatoba, in dining and bar heights.

Accessories

The Egoé LEVA accessories complete a module with the parts a given use needs. The group holds wall bars and climbing ladders in zinc coated and powder coated steel, a bike holder and a bike rack in brushed stainless steel, and wall frames and infill panels for closing the bays. Every part fixes to the existing cube structure.

Picnic cubes

The Egoé LEVA picnic cubes come with an integrated table and benches, so they are ready for public installations. The structure is zinc coated and powder coated steel with larch beams, or all steel, and the table, seats and backrests are solid tropical wood. You choose between a single and a double cube, each also available with one or two ashtray tables and a terrace.

Home sets

The Egoé LEVA Home sets are ready configurations of the modular system for a terrace, a courtyard and a garden. In them the cubes are combined with hanging daybeds, upholstered benches, outdoor kitchens, planters, climbing walls and blackboards. You choose between a single, double, triple and quadruple cube, and each set comes with its own walls, roof and floor.

Office sets

The Egoé LEVA Office sets bring work outdoors. The cubes are combined with integrated tables and bar tables with HPL tops, whiteboards, upholstered benches, slat walls and sound insulating walls. You choose between a single, double, triple and quadruple cube, from a spot for a short meeting to a room for focused work.

Public sets

The Egoé LEVA Public sets are configurations for parks, paths and stopping places. The base is a picnic cube with an integrated table and benches and a steel lower structure, completed by slat walls with planters, blackboards, climbing walls, banner walls and polycarbonate roofs. The floors are wooden or concrete, and the sets come with a single or double cube and with an extended terrace.

Bike and Bus sets

The Egoé LEVA Bike sets are bicycle shelters built from the modular system. The structure is all steel, the walls are glass, wooden slats and waterproof plywood, the roofs are glass, green or solid, and bike racks and hangers sit inside. The same group holds the Bus set, a triple cube with larch beams and benches and tables of HPL, designed for children 120 to 145 cm tall.

Sort by:

View

There are 126 products.

Egoe LEVA single cube, larch

The single cube is the basic module of the LEVA system. Larch beams and powder-coated metal corner brackets form the frame, with a 216.5 x 216.5 cm footprint. You add a roof, a wall, a bench or a planter and build the space you need.

structure: larch beams and powder-coated metal corner brackets
material: larch
finish: wooden or steel base
structure colour: 22 standard RAL shades
dimensions: 216.5 x 216.5 x 240 cm
weight: 111 kg (wooden base), 141 kg (steel base)
design: Egoé studio

€2,039.00

Egoe LEVA single cube, steel

The all-steel single cube is the basic LEVA module for demanding locations. The structure is built from thin-walled 80 x 80 mm steel bars with zinc protection and powder coating, and the fasteners are stainless steel. The cube is dismountable and takes the same roofs, walls and accessories as the wooden version.

structure: steel, zinc coated and powder coated, dismountable
material: steel
structure colour: 22 standard RAL shades
dimensions: 216.5 x 216.5 x 240 cm
weight: 168 kg
design: Egoé studio

€2,202.00

Egoe LEVA terrace frame, larch

The terrace frame is a low base that carries a LEVA module. It is built from larch beams and powder-coated metal corner brackets and stands 8 cm high. Use it where the cube needs to sit above the ground and line up with the terrace.

structure: larch beams and powder-coated metal corner brackets
material: larch
finish: wooden or steel base
structure colour: 22 standard RAL shades
dimensions: 216.5 x 107.9 x 8 cm
weight: 19.5 kg (wooden base), 31 kg (steel base)
design: Egoé studio

€488.00

Egoe LEVA double cube, larch

The double cube joins two LEVA bays into one 425 x 216.5 cm plan. Larch beams and powder-coated metal corner brackets carry the structure. The space takes a dining table with benches or an outdoor office.

structure: larch beams and powder-coated metal corner brackets
material: larch
finish: wooden or steel base
structure colour: 22 standard RAL shades
dimensions: 425 x 216.5 x 240 cm
weight: 183 kg (wooden base), 238 kg (steel base)
design: Egoé studio

€3,227.00

Egoe LEVA double cube, steel

The all-steel double cube covers a 425 x 216.5 cm plan. The structure is built from thin-walled 80 x 80 mm steel bars with zinc protection and powder coating, with stainless steel fasteners. The module is dismountable and made for public space and long outdoor service.

structure: steel, zinc coated and powder coated, dismountable
material: steel
structure colour: 22 standard RAL shades
dimensions: 425 x 216.5 x 240 cm
weight: 283.6 kg
design: Egoé studio

€3,895.00

Egoe LEVA triple cube, larch

The triple cube lines up three LEVA bays into a 633.5 cm run. Larch beams and powder-coated metal corner brackets carry the structure. The run takes several roofs and walls at once, so it turns into a covered passage or a longer outdoor room.

structure: larch beams and powder-coated metal corner brackets
material: larch
finish: wooden or steel base
structure colour: 22 standard RAL shades
dimensions: 633.5 x 216.5 x 240 cm
weight: 256 kg (wooden base), 335 kg (steel base)
design: Egoé studio

€4,416.00

Egoe LEVA triple cube, steel

The all-steel triple cube forms a 633.5 cm run. The structure is built from thin-walled 80 x 80 mm steel bars with zinc protection and powder coating. The module is dismountable and carries LEVA roofs, walls and accessories.

structure: steel, zinc coated and powder coated, dismountable
material: steel
structure colour: 22 standard RAL shades
dimensions: 633.5 x 216.5 x 240 cm
weight: 399 kg
design: Egoé studio

€5,582.00

Egoe LEVA triple cube L-shaped, larch

The L-shaped triple cube sets three LEVA bays into a corner, with a 425 x 425 cm plan. Larch beams and powder-coated metal corner brackets carry the structure. The L closes two sides and leaves the corner open, which works along a wall or a garden boundary.

structure: larch beams and powder-coated metal corner brackets
material: larch
finish: wooden or steel base
structure colour: 22 standard RAL shades
dimensions: 425 x 425 x 240 cm
weight: 256 kg (wooden base), 334 kg (steel base)
design: Egoé studio

€4,475.00

Egoe LEVA triple cube L-shaped, steel

The all-steel L-shaped triple cube sets three bays into a corner on a 425 x 425 cm plan. The structure is built from thin-walled 80 x 80 mm steel bars with zinc protection and powder coating. The module is dismountable and takes LEVA roofs, walls and accessories.

structure: steel, zinc coated and powder coated, dismountable
material: steel
structure colour: 22 standard RAL shades
dimensions: 425 x 425 x 240 cm
weight: 398 kg
design: Egoé studio

€5,460.00

Egoe LEVA quadruple cube, larch

The quadruple cube joins four LEVA bays into a 425 x 425 cm square. Larch beams and powder-coated metal corner brackets carry the structure. The closed plan suits an outdoor dining room, an exhibition space or an outdoor office for a team.

structure: larch beams and powder-coated metal corner brackets
material: larch
finish: wooden or steel base
structure colour: 22 standard RAL shades
dimensions: 425 x 425 x 240 cm
weight: 301 kg (wooden base), 395 kg (steel base)
design: Egoé studio

€5,160.00

Egoe LEVA quadruple cube, steel

The all-steel quadruple cube covers a 425 x 425 cm square. The structure is built from thin-walled 80 x 80 mm steel bars with zinc protection and powder coating. The module is dismountable and made for public and commercial installations.

structure: steel, zinc coated and powder coated, dismountable
material: steel
structure colour: 22 standard RAL shades
dimensions: 425 x 425 x 240 cm
weight: 471 kg
design: Egoé studio

€6,973.00

Egoe LEVA planter with wooden cladding, larch

The planter with wooden cladding hangs on the side of a LEVA module and closes an open bay. The steel structure is zinc coated and powder coated, the cladding is larch boards and three galvanised inner pots sit inside. Planted up, it works as a green wall and as a railing at the same time.

structure: steel, zinc coated and powder coated, larch wood cladding, three galvanised inner pots
material: larch
structure colour: 22 standard RAL shades
dimensions: 200.5 x 16.4 x 14.3 cm
weight: 23.7 kg
design: Egoé studio

€523.00

Egoe LEVA planter with steel sheet cladding, steel sheet

The planter with steel sheet cladding is the version with a smooth metal face. Structure and cladding are zinc coated and powder coated, and three galvanised inner pots sit inside. You hang it on the side of a LEVA module and close an open bay with it.

structure: steel, zinc coated and powder coated, steel sheet cladding, three galvanised inner pots
material: steel sheet
structure colour: 22 standard RAL shades
dimensions: 200.5 x 21.2 x 14.3 cm
weight: 27.9 kg
design: Egoé studio

€545.00

Egoe LEVA hanging daybed, larch

The hanging daybed hangs inside a LEVA cube and gives you a place to lie down outdoors. Frame and grid are larch treated with an oil nano-coating, and the mattress is Dryfeel foam covered with Crévin outdoor fabric. The bed measures 178 x 178 cm and takes two people.

structure: frame and grid in larch with an oil nano-coating, PE net
material: larch, Dryfeel foam with Crévin outdoor fabric
dimensions: 178 x 178 x 16 cm
weight: 72.7 kg
design: Egoé studio

€2,135.00

Egoe LEVA wooden bench

The wooden bench fits into the side of a LEVA module and stays there as a fixed part of the structure. The steel frame is zinc coated and powder coated, and the seat is made of wooden slats. You choose the seat in steamed robinia, thermo ash or jatoba.

structure: steel, zinc coated and powder coated, seat of wooden slats
material: steamed robinia, thermo ash, jatoba
structure colour: 22 standard RAL shades
dimensions: 200.5 x 59 x 7.5 cm
weight: 33.4 kg
design: Egoé studio

€861.00

Egoe LEVA corner wooden bench

The corner wooden bench closes two adjacent sides of a LEVA cube and ties them into a seating corner. The steel frame is zinc coated and powder coated, and the seat is made of wooden slats. You choose the seat in steamed robinia, thermo ash or jatoba.

structure: steel, zinc coated and powder coated, seat of wooden slats
material: steamed robinia, thermo ash, jatoba
structure colour: 22 standard RAL shades
dimensions: 200.5 x 200.5 x 7.5 cm
weight: 58.4 kg
design: Egoé studio

€1,567.00

Egoe LEVA double-sided wooden bench

The double-sided wooden bench gives you seats on both faces of the same LEVA module side. The steel frame is zinc coated and powder coated, and the seats are made of wooden slats. You choose the seat in steamed robinia, thermo ash or jatoba.

structure: steel, zinc coated and powder coated, seat of wooden slats
material: steamed robinia, thermo ash, jatoba
structure colour: 22 standard RAL shades
dimensions: 200.5 x 111.5 x 7.5 cm
weight: 69 kg
design: Egoé studio

€1,705.00

Egoe LEVA combined corner wooden bench

The combined corner wooden bench brings a straight run and a corner into one seating layout inside a LEVA cube. The steel frame is zinc coated and powder coated, and the seats are made of wooden slats. You choose the seat in steamed robinia, thermo ash or jatoba.

structure: steel, zinc coated and powder coated, seat of wooden slats
material: steamed robinia, thermo ash, jatoba
structure colour: 22 standard RAL shades
dimensions: 200.5 x 59 x 7.5 cm
weight: 98 kg
design: Egoé studio

€2,439.00

Egoe LEVA upholstered bench, fabric

The upholstered bench brings a soft seat into a LEVA module. The steel structure is zinc coated and powder coated, the seat is Dryfeel foam covered with outdoor fabric, and the seat board is birch plywood. The bench is 200.5 cm long and takes the LEV321 backrest.

structure: steel, zinc coated and powder coated, seat board of birch plywood
material: Dryfeel foam with outdoor fabric, birch plywood
structure colour: 22 standard RAL shades
dimensions: 200.5 x 53.5 x 34 cm
weight: 36.8 kg
design: Egoé studio

€1,030.00

Egoe LEVA backrest for upholstered bench LEV320, Batyline

The backrest completes the LEV320 upholstered bench and turns it into a seat with support for the back. The steel frame is zinc coated and powder coated, and the backrest is Batyline outdoor mesh with UV protection and high abrasion resistance. The mesh lets air through, so the backrest dries quickly.

structure: steel frame, zinc coated and powder coated
material: Batyline outdoor mesh
structure colour: 22 standard RAL shades
dimensions: 200.5 x 22.3 x 31.6 cm
weight: 23.2 kg
completes: the LEV320 upholstered bench
design: Egoé studio

€672.00

Egoe LEVA corner upholstered bench, fabric

The corner upholstered bench closes two sides of a LEVA cube with a soft seat. The steel structure is zinc coated and powder coated, the seat is Dryfeel foam covered with outdoor fabric, and the seat board is birch plywood. The corner layout measures 200.5 x 202.1 cm.

structure: steel, zinc coated and powder coated, seat board of birch plywood
material: Dryfeel foam with outdoor fabric, birch plywood
structure colour: 22 standard RAL shades
dimensions: 200.5 x 202.1 x 53.5 cm
weight: 64 kg
design: Egoé studio

€2,131.00

Egoe LEVA shading mesh roof, SioLine

The shading mesh roof is the lightest cover for a LEVA module. It is made of SioLine outdoor mesh with stainless steel fittings and weighs 1.5 kg in total. The mesh holds back part of the sun and lets air through, so it stays cooler underneath.

structure: SioLine outdoor mesh, stainless steel fittings
material: SioLine outdoor mesh
dimensions: 205 x 205 cm
weight: 1.5 kg
design: Egoé studio

€108.00

Egoe LEVA wooden slat roof, larch

The wooden slat roof covers a LEVA module with a run of larch slats. The frame is powder-coated aluminium alloy and the fasteners are stainless steel. The slats cast shade and let air through, so the roof never feels closed.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch
structure colour: 22 standard RAL shades
dimensions: 192.9 x 206.1 x 8 cm
weight: 65.6 kg
design: Egoé studio

€1,006.00

Egoe LEVA solid roof, larch

The solid roof closes a LEVA module against rain. The steel structure is zinc coated and powder coated, the cover is trapezoidal polycarbonate with UV protection, and a suspended ceiling of wooden slats runs underneath. The space below stays dry and bright.

structure: steel, zinc coated and powder coated, trapezoidal polycarbonate with UV protection, suspended ceiling of wooden slats
material: larch
structure colour: 22 standard RAL shades
dimensions: 225 x 225 x 24.6 cm
weight: 107 kg
design: Egoé studio

€2,461.00

Egoe LEVA green roof, larch

The green roof carries pre-grown stonecrop carpets in two powder-coated aluminium tubs, with a suspended ceiling of wooden slats underneath. The layer build-up includes a 30 mm retention board, a 100 g/m2 filter foil and an extensive roof substrate. The roof can only be placed on the all-steel structure.

structure: two powder-coated aluminium tubs with pre-grown green tiles, suspended ceiling of wooden slats
material: pre-grown green tiles, larch slats
structure colour: 22 standard RAL shades
dimensions: 213 x 207 x 8 cm
weight: 400 kg
layer build-up: 30 mm retention board, 100 g/m2 filter foil, extensive roof substrate, pre-grown stonecrop carpet
restriction: the green roof only goes with the all-steel structure
design: Egoé studio

€2,829.00

Egoe LEVA solid roof SLUM, larch

The SLUM solid roof covers one LEVA bay and drains to one side. The steel structure is zinc coated and powder coated, the cover is trapezoidal polycarbonate with UV protection, and a suspended ceiling of larch slats runs underneath. The roof measures 225.5 x 216.5 cm.

structure: steel, zinc coated and powder coated, trapezoidal polycarbonate with UV protection, suspended ceiling of wooden slats
material: larch
structure colour: 22 standard RAL shades
dimensions: 225.5 x 216.5 x 22.6 cm
weight: 63 kg
design: Egoé studio

€1,746.00

Egoe LEVA extended solid roof SLUM+, larch

The SLUM+ extended solid roof reaches past the edge of the LEVA module and covers the strip in front of it as well. The steel structure is zinc coated and powder coated, the cover is trapezoidal polycarbonate with UV protection, and a suspended ceiling of larch slats runs underneath. The roof measures 225.3 x 315 cm.

structure: steel, zinc coated and powder coated, trapezoidal polycarbonate with UV protection, suspended ceiling of wooden slats
material: larch
structure colour: 22 standard RAL shades
dimensions: 225.3 x 315 x 22.6 cm
weight: 98 kg
design: Egoé studio

€2,335.00

Egoe LEVA folding roof, Kortexin

The folding roof is a canvas cover you spread out or fold away as needed. The canvas is water-resistant polyester reinforced with aluminium alloy poles, the tension brackets are zinc coated and powder coated, and the tension wire is stainless steel. The roof weighs 14 kg, so one person can move it.

structure: aluminium alloy poles, zinc coated and powder coated steel tension brackets, stainless steel tension wire
material: water-resistant Kortexin polyester fabric
structure colour: 22 standard RAL shades
dimensions: 231 x 194.7 cm
weight: 14 kg
height of the folded cover: 200 to 150 mm
design: Egoé studio

€736.00

Showing 1-28 of 126 item(s)