Contact us
Call us: +386 (0)1 4305123

0 €0.00

LEVA

The LEVA is "the most sophisticated bunker prototype", a modular system consisting of a basic cube and accessories. In the private sphere it makes children's playrooms with a climbing wall or a blackboard, outdoor daybeds with suspended beds, dining areas from several combined cubes, and kitchen spaces for outdoor cooking with herb planters. Companies use it for outdoor offices with folding work desks and partitions, festival pergolas, exhibition and display spaces and cinemas.

LEVA uses weather-resistant materials: larch or acacia structural beams, galvanized steel joints with a powder-coat finish, outdoor plywood and outdoor textiles, all with minimal maintenance.

The design is minimalist - light, airy and functional. It is easy to assemble and usually needs no ground anchoring.

Subcategories

Cubes

The cubes are the basic modules of the Egoé LEVA system. The base bay measures 216.5 x 216.5 cm, and from it you build a single, double, triple, L-shaped or quadruple layout. The frame is larch beams with powder-coated metal corner brackets, or all steel with zinc and powder coating. Roofs, walls, benches, planters and accessories all fix to the cube.

Planters

The Egoé LEVA planters close an open bay of a module and turn it into a green wall. The steel structure is zinc coated and powder coated, and the cladding is larch boards or steel sheet. Each planter holds three galvanised inner pots.

Benches and daybeds

The Egoé LEVA benches and daybeds fit into the sides of a cube and become a fixed part of the structure. You choose between wooden benches in steamed robinia, thermo ash or jatoba, upholstered benches with Dryfeel foam and outdoor fabric, and a hanging daybed. The steel structures are zinc coated and powder coated.

Roofs

The Egoé LEVA roofs cover a module and decide how much sun and rain it lets through. The range runs from a light shading mesh and a folding canvas to slat, glass, green and solid roofs with polycarbonate or sandwich panels. They all fix to the same module, so the cover can be changed later.

Walls

The Egoé LEVA walls close individual bays of a module and decide where the space stays open and where it is screened. You choose between slat, fabric, glass and sound insulating walls, blackboards, climbing walls, a banner wall and a wall with a sliding door. Some walls also carry a planter, a table or a whiteboard.

Floors

The Egoé LEVA floors close the plan of a module and set it on a level base. You choose between a wooden floor of larch boards with an oil nano-coating and a concrete floor with 500 x 500 mm tiles on a steel frame. Each version comes in a full and a half bay size.

Outdoor kitchens

The Egoé LEVA outdoor kitchens fit into the side of a module and bring the cooking outdoors. The steel structures are zinc coated and powder coated, and the worktops are solid steamed robinia. The range runs from a single-sided worktop with a grill to a double-sided kitchen with gas stoves, a sink and a built-in ONEQ Glow grill, completed by a utensils holder and two waste bins.

Tables

The Egoé LEVA tables fit between two bays of a module or along its side. The steel structures are zinc coated and powder coated, and the tops are solid wooden slats, solid planks or HPL. For the wooden tops you choose between steamed robinia, thermo ash and jatoba, in dining and bar heights.

Accessories

The Egoé LEVA accessories complete a module with the parts a given use needs. The group holds wall bars and climbing ladders in zinc coated and powder coated steel, a bike holder and a bike rack in brushed stainless steel, and wall frames and infill panels for closing the bays. Every part fixes to the existing cube structure.

Picnic cubes

The Egoé LEVA picnic cubes come with an integrated table and benches, so they are ready for public installations. The structure is zinc coated and powder coated steel with larch beams, or all steel, and the table, seats and backrests are solid tropical wood. You choose between a single and a double cube, each also available with one or two ashtray tables and a terrace.

Home sets

The Egoé LEVA Home sets are ready configurations of the modular system for a terrace, a courtyard and a garden. In them the cubes are combined with hanging daybeds, upholstered benches, outdoor kitchens, planters, climbing walls and blackboards. You choose between a single, double, triple and quadruple cube, and each set comes with its own walls, roof and floor.

Office sets

The Egoé LEVA Office sets bring work outdoors. The cubes are combined with integrated tables and bar tables with HPL tops, whiteboards, upholstered benches, slat walls and sound insulating walls. You choose between a single, double, triple and quadruple cube, from a spot for a short meeting to a room for focused work.

Public sets

The Egoé LEVA Public sets are configurations for parks, paths and stopping places. The base is a picnic cube with an integrated table and benches and a steel lower structure, completed by slat walls with planters, blackboards, climbing walls, banner walls and polycarbonate roofs. The floors are wooden or concrete, and the sets come with a single or double cube and with an extended terrace.

Bike and Bus sets

The Egoé LEVA Bike sets are bicycle shelters built from the modular system. The structure is all steel, the walls are glass, wooden slats and waterproof plywood, the roofs are glass, green or solid, and bike racks and hangers sit inside. The same group holds the Bus set, a triple cube with larch beams and benches and tables of HPL, designed for children 120 to 145 cm tall.

Sort by:

View

There are 126 products.

Egoe LEVA glass roof, glass

The glass roof lets daylight through and closes a LEVA module against rain. It combines tempered safety glass, a zinc coated and powder coated steel structure and rubber sealing strips. It is used in LEVA Office layouts, where the space below stays bright.

structure: steel, zinc coated and powder coated, rubber sealing strips
material: tempered safety glass
structure colour: 22 standard RAL shades
dimensions: 297 x 208 cm
weight: 193 kg
design: Egoé studio

€2,483.00

Egoe LEVA glass roof with side overhang, glass

The glass roof with side overhang reaches past the edge of the LEVA module and covers the strip beside it. It combines tempered safety glass, a zinc coated and powder coated steel structure and rubber sealing strips. The overhang shelters an entrance or an outdoor bench from rain.

structure: steel, zinc coated and powder coated, rubber sealing strips
material: tempered safety glass
structure colour: 22 standard RAL shades
dimensions: 297 x 295.5 cm
weight: 250 kg
design: Egoé studio

€2,840.00

Egoe LEVA roof made of sandwich panels, sandwich panels

The sandwich panel roof closes a LEVA module with a solid, insulated surface. The FRP XPS panels are fibreglass reinforced and the steel structure is zinc coated and powder coated. Use it where the space has to stay closed in poor weather as well.

structure: steel, zinc coated and powder coated, FRP XPS sandwich panels with fibreglass reinforcement
material: sandwich panels
structure colour: 22 standard RAL shades
dimensions: 210.5 x 297.6 x 13.4 cm
weight: 98 kg
design: Egoé studio

€1,956.00

Egoe LEVA roof made of sandwich panels with a lateral overhang, sandwich panels

The sandwich panel roof with a lateral overhang covers a LEVA module and the strip beside it. The FRP XPS panels are fibreglass reinforced and the steel structure is zinc coated and powder coated. The overhang shelters an entrance or a work place next to the module.

structure: steel, zinc coated and powder coated, FRP XPS sandwich panels with fibreglass reinforcement
material: sandwich panels
structure colour: 22 standard RAL shades
dimensions: 297.6 x 297.6 x 13.4 cm
weight: 105 kg
design: Egoé studio

€2,249.00

Egoe LEVA fabric wall, Kortexin

The fabric wall closes one bay of a LEVA module and screens it from wind and from view. The canvas is waterproof polyester, the fittings are stainless steel and the wall attaches with velcro. It weighs 2 kg, so you take it down and store it in a few minutes.

structure: water-resistant polyester outdoor canvas, stainless steel fittings, velcro attachment
material: water-resistant Kortexin polyester fabric
dimensions: 206 x 224 cm
weight: 2 kg
design: Egoé studio

€165.00

Egoe LEVA blackboard wall with climbing holds, plywood

The blackboard wall with climbing holds closes a LEVA bay and turns it into a play surface. The front is 18 mm outdoor plywood finished with blackboard paint and fitted with six climbing holds, and the back is 9 mm black outdoor plywood. The frame is larch treated with colourless oil.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: 22 standard RAL shades
dimensions: 198 x 221.5 x 7.6 cm
weight: 109 kg
climbing holds: 6 pieces
design: Egoé studio

€1,588.00

Egoe LEVA half-size blackboard wall with climbing holds, plywood

The half-size blackboard wall with climbing holds covers half a LEVA bay. The front is 18 mm outdoor plywood finished with blackboard paint and fitted with three climbing holds, and the back is 9 mm black outdoor plywood. Use it next to a half wall or beside the entrance to the cube.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: 22 standard RAL shades
dimensions: 99 x 221.5 x 7.6 cm
weight: 56.5 kg
climbing holds: 3 pieces
design: Egoé studio

€813.00

Egoe LEVA climbing wall, plywood

The climbing wall closes a LEVA bay and turns it into a climbing surface. The front is 18 mm outdoor plywood with pre-drilled M10 threaded holes and thirty climbing holds, and the back is 9 mm black outdoor plywood. Move the holds and the route changes.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: 22 standard RAL shades
dimensions: 198 x 221.5 x 7.6 cm
weight: 121 kg
climbing holds: 30 pieces, M10 threaded holes
design: Egoé studio

€2,614.00

Egoe LEVA half-size climbing wall, plywood

The half-size climbing wall covers half a LEVA bay. The front is 18 mm outdoor plywood with pre-drilled M10 threaded holes and fifteen climbing holds, and the back is 9 mm black outdoor plywood. It suits smaller layouts and younger children.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: 22 standard RAL shades
dimensions: 99 x 221.5 x 7.6 cm
weight: 57.5 kg
climbing holds: 15 pieces, M10 threaded holes
design: Egoé studio

€1,299.00

Egoe LEVA sound insulating wall, recycled rubber

The sound insulating wall closes a LEVA bay and cuts the noise inside. The front is 18 mm outdoor plywood with a recycled rubber absorber covered in fabric, the back is 9 mm black outdoor plywood, and the frame is wooden. It helps beside a busy road or between work places.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood, recycled rubber absorber
dimensions: 198 x 221.5 x 7.8 cm
weight: 134 kg

€1,413.00

Egoe LEVA half-size sound insulating wall, recycled rubber

The half-size sound insulating wall covers half a LEVA bay. The frame is larch, the front is 18 mm outdoor plywood with a recycled rubber absorber covered in geltex, and the back is 9 mm black outdoor plywood. You combine it with the other half-size walls of the system.

structure: larch frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood, recycled rubber absorber
dimensions: 99 x 221.5 x 7.8 cm
weight: 68 kg

€726.00

Egoe LEVA banner wall, PVC

The banner wall carries a printed banner in a LEVA bay. The banner is outdoor mesh, hung and tensioned with steel elements and a rubber cord. It works for signage, sponsors or information at a fair, a festival or in public space.

structure: steel hanging and tensioning elements, rubber cord
material: PVC, printed outdoor mesh
dimensions: 211 x 198 x 0.2 cm
weight: 8.4 kg
printing of the banner is not included in the price and is quoted separately from the print data
design: Egoé studio

€260.00

Egoe LEVA slat wall, larch

The slat wall closes a LEVA bay with a run of larch slats. The frame is powder-coated aluminium alloy and the fasteners are stainless steel. The slats block the view and let air through, so the space stays ventilated.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch
structure colour: 22 standard RAL shades
dimensions: 192.9 x 3.5 x 224 cm
weight: 52 kg
design: Egoé studio

€1,111.00

Egoe LEVA two-thirds size slat wall with wooden planter, larch

The two-thirds size slat wall with wooden planter combines screening and planting in one LEVA bay. The upper part is larch slats in a powder-coated aluminium frame, and below sits a planter with wooden cladding and three galvanised inner pots. The wall stands 158.1 cm high.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel planter with larch cladding, three galvanised inner pots
material: larch
structure colour: 22 standard RAL shades
dimensions: 200.5 x 21.2 x 158.1 cm
weight: 58 kg
planter: uses the LEV200 pots
design: Egoé studio

€1,437.00

Egoe LEVA two-thirds size slat wall with metal planter, larch

The two-thirds size slat wall with metal planter is the version with a smooth sheet metal planter face. The upper part is larch slats in a powder-coated aluminium frame, and below sits a steel planter with three galvanised inner pots. The wall stands 158.1 cm high.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel planter with steel sheet cladding, three galvanised inner pots
material: larch
structure colour: 22 standard RAL shades
dimensions: 200.5 x 21.2 x 158.1 cm
weight: 57 kg
planter: uses the LEV201 pots
design: Egoé studio

€1,511.00

Egoe LEVA one-third size slat wall with integrated table, larch

The one-third size slat wall with integrated table offers screening and a work surface in one element. The wall is larch slats in a powder-coated aluminium frame, the table structure is zinc coated and powder coated steel, and the top is HPL. The table stands 64 cm high and suits bench seating.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel table structure
material: larch, HPL table top
structure colour: 22 standard RAL shades
dimensions: 200.5 x 77 x 64 cm
weight: 61 kg
design: Egoé studio

€1,601.00

Egoe LEVA half-size slat wall with integrated bar table, larch

The half-size slat wall with integrated bar table sets a counter into the edge of a LEVA module. The wall is larch slats in a powder-coated aluminium frame, the table structure is zinc coated and powder coated steel, and the top is HPL. The counter stands 110 cm high and is made for standing use.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel table structure
material: larch, HPL table top
structure colour: 22 standard RAL shades
dimensions: 200.5 x 38 x 110 cm
weight: 59 kg
design: Egoé studio

€1,537.00

Egoe LEVA half-size slat wall, larch

The half-size slat wall covers half a LEVA bay. The slats are larch, the frame is powder-coated aluminium alloy and the fasteners are stainless steel. Use it beside an entrance or where only part of a side needs screening.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch
structure colour: 22 standard RAL shades
dimensions: 94.5 x 3.5 x 224 cm
weight: 26 kg
design: Egoé studio

€553.00

Egoe LEVA slat wall with integrated whiteboard, larch

The slat wall with integrated whiteboard brings a writing surface into a LEVA module. The wall is larch slats in a powder-coated aluminium frame, and the board is dibond. It is used in LEVA Office layouts and in outdoor classrooms.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch, dibond whiteboard
structure colour: 22 standard RAL shades
dimensions: 192.9 x 3.5 x 224 cm
weight: 81.4 kg
design: Egoé studio

€1,501.00

Egoe LEVA strap wall, polyester

The strap wall closes a LEVA bay with horizontal polyester straps. The straps fix with velcro onto aluminium alloy bars, and the fittings are stainless steel. The wall weighs 9 kg and you move it without tools.

structure: aluminium alloy bars, stainless steel, velcro attachment
material: polyester straps
dimensions: 198.7 x 4 x 224 cm
weight: 9 kg
design: Egoé studio

€617.00

Egoe LEVA glass wall, glass

The glass wall closes a LEVA bay and keeps the view open. It combines printed tempered safety glass, rubber seals and stainless steel fasteners. It is used in LEVA Office layouts, where the space stays bright and sheltered from wind.

structure: rubber seals, stainless steel fasteners
material: printed tempered safety glass
dimensions: 216.1 x 222 cm
weight: 105 kg
design: Egoé studio

€665.00

Egoe LEVA wall with sliding door, larch

The wall with sliding door closes a LEVA module and still lets you open it. The lower part is a slat wall, the upper part is clear polycarbonate, and the sliding door has a cylinder lock. Use it where the space has to be locked at the end of the day.

structure: slatted half-wall with clear polycarbonate, sliding door with a cylinder lock
material: larch, clear polycarbonate
dimensions: 200.2 x 224 cm
weight: 53 kg
design: Egoé studio

€1,469.00

Egoe LEVA wooden floor, larch

The wooden floor closes the plan of a LEVA cube and sets the module on a level surface. Boards and support frame are larch with an oil nano-coating, and the fasteners are stainless steel. The panel measures 200.5 x 200.3 cm and matches the single cube.

structure: floor of larch boards with an oil nano-coating, wooden support frame, stainless steel fasteners
material: larch
dimensions: 200.5 x 200.3 x 8 cm
weight: 108 kg
design: Egoé studio

€1,202.00

Egoe LEVA half-size wooden floor, larch

The half-size wooden floor covers half a LEVA bay, so you also use it as a terrace in front of the module. Boards and support frame are larch with an oil nano-coating, and the fasteners are stainless steel. The panel measures 200.5 x 100.3 cm.

structure: floor of larch boards with an oil nano-coating, wooden support frame, stainless steel fasteners
material: larch
dimensions: 200.5 x 100.3 x 8 cm
weight: 45 kg
design: Egoé studio

€576.00

Egoe LEVA concrete floor, concrete

The concrete floor gives a LEVA cube a heavy and durable base. The steel support frame has corrosion protection and the surface is made of 500 x 500 mm concrete tiles. The panel measures 200 x 200 cm and takes public use with heavy traffic.

structure: steel support frame with corrosion protection, 500 x 500 mm concrete tiles
material: concrete
dimensions: 200 x 200 cm
weight: 815 kg
design: Egoé studio

€997.00

Egoe LEVA half-size concrete floor, concrete

The half-size concrete floor covers half a LEVA bay. The steel support frame has corrosion protection and the surface is made of 500 x 500 mm concrete tiles. The panel measures 200 x 100 cm and also works as a terrace in front of the module.

structure: steel support frame with corrosion protection, 500 x 500 mm concrete tiles
material: concrete
dimensions: 200 x 100 cm
weight: 403 kg
design: Egoé studio

€560.00

Egoe LEVA double-sided outdoor kitchen, steamed robinia

The double-sided outdoor kitchen fits into the side of a LEVA cube and gives you a worktop on both faces. The steel structure is zinc coated and powder coated, the worktop is solid steamed robinia, and the equipment covers gas stoves, a cutting board, a removable sink with a faucet and a silicone bowl, and removable steel planters. The worktop also holds the BBQ grid that comes with the freestanding GRL101 firepit.

structure: steel, zinc coated and powder coated, solid wood worktop, cutting board, gas stoves, removable steel flower containers, removable sink with a faucet and a silicone bowl for hot temperatures, holder for the BBQ grid
material: steamed robinia, silicone, stainless steel
structure colour: 22 standard RAL shades
dimensions: 200.5 x 34.4 x 128 cm
weight: 152 kg
grill: holder for the BBQ grid that is delivered with the freestanding GRL101 firepit
design: Egoé studio

€3,894.00

Egoe LEVA outdoor kitchen worktop with BBQ grill, round grill, steamed robinia

The outdoor kitchen worktop with BBQ grill fits into the side of a LEVA cube and is made for cooking over fire. The steel structure is zinc coated and powder coated, the worktop is solid steamed robinia, and removable steel planters are included. The worktop holds the BBQ grid that comes with the freestanding GRL101 firepit.

structure: steel, zinc coated and powder coated, solid wood worktop, removable steel flower containers, holder for the BBQ grid
material: steamed robinia, silicone, stainless steel
structure colour: 22 standard RAL shades
dimensions: 200.5 x 72 x 34.4 cm
weight: 95 kg
grill: holder for the BBQ grid that is delivered with the freestanding GRL101 firepit
design: Egoé studio

€1,940.00

Showing 29-56 of 126 item(s)