Design collections

We offer you our selection of design producers.

Egoe LEVA backrest for upholstered bench LEV320, Batyline
Egoe LEVA backrest for upholstered bench LEV320, Batyline
The backrest completes the LEV320 upholstered bench and turns it into a seat with support for the back. The steel frame is zinc coated and powder coated, and the backrest is Batyline outdoor mesh with UV protection and high abrasion resistance. The mesh lets air through, so the backrest dries quickly.

structure: steel frame, zinc coated and powder coated
material: Batyline outdoor mesh
structure colour: 22 standard RAL shades
dimensions: 200.5 x 22.3 x 31.6 cm
weight: 23.2 kg
completes: the LEV320 upholstered bench
design: Egoé studio
€672.00
Egoe LEVA corner upholstered bench, fabric
Egoe LEVA corner upholstered bench, fabric
The corner upholstered bench closes two sides of a LEVA cube with a soft seat. The steel structure is zinc coated and powder coated, the seat is Dryfeel foam covered with outdoor fabric, and the seat board is birch plywood. The corner layout measures 200.5 x 202.1 cm.

structure: steel, zinc coated and powder coated, seat board of birch plywood
material: Dryfeel foam with outdoor fabric, birch plywood
structure colour: 22 standard RAL shades
dimensions: 200.5 x 202.1 x 53.5 cm
weight: 64 kg
design: Egoé studio
€2,131.00
Egoe LEVA shading mesh roof, SioLine
Egoe LEVA shading mesh roof, SioLine
The shading mesh roof is the lightest cover for a LEVA module. It is made of SioLine outdoor mesh with stainless steel fittings and weighs 1.5 kg in total. The mesh holds back part of the sun and lets air through, so it stays cooler underneath.

structure: SioLine outdoor mesh, stainless steel fittings
material: SioLine outdoor mesh
dimensions: 205 x 205 cm
weight: 1.5 kg
design: Egoé studio
€108.00
Egoe LEVA wooden slat roof, larch
Egoe LEVA wooden slat roof, larch
The wooden slat roof covers a LEVA module with a run of larch slats. The frame is powder-coated aluminium alloy and the fasteners are stainless steel. The slats cast shade and let air through, so the roof never feels closed.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch
structure colour: 22 standard RAL shades
dimensions: 192.9 x 206.1 x 8 cm
weight: 65.6 kg
design: Egoé studio
€1,006.00
Egoe LEVA solid roof, larch
Egoe LEVA solid roof, larch
The solid roof closes a LEVA module against rain. The steel structure is zinc coated and powder coated, the cover is trapezoidal polycarbonate with UV protection, and a suspended ceiling of wooden slats runs underneath. The space below stays dry and bright.

structure: steel, zinc coated and powder coated, trapezoidal polycarbonate with UV protection, suspended ceiling of wooden slats
material: larch
structure colour: 22 standard RAL shades
dimensions: 225 x 225 x 24.6 cm
weight: 107 kg
design: Egoé studio
€2,461.00
Egoe LEVA green roof, larch
Egoe LEVA green roof, larch
The green roof carries pre-grown stonecrop carpets in two powder-coated aluminium tubs, with a suspended ceiling of wooden slats underneath. The layer build-up includes a 30 mm retention board, a 100 g/m2 filter foil and an extensive roof substrate. The roof can only be placed on the all-steel structure.

structure: two powder-coated aluminium tubs with pre-grown green tiles, suspended ceiling of wooden slats
material: pre-grown green tiles, larch slats
structure colour: 22 standard RAL shades
dimensions: 213 x 207 x 8 cm
weight: 400 kg
layer build-up: 30 mm retention board, 100 g/m2 filter foil, extensive roof substrate, pre-grown stonecrop carpet
restriction: the green roof only goes with the all-steel structure
design: Egoé studio
€2,829.00
Egoe LEVA solid roof SLUM, larch
Egoe LEVA solid roof SLUM, larch
The SLUM solid roof covers one LEVA bay and drains to one side. The steel structure is zinc coated and powder coated, the cover is trapezoidal polycarbonate with UV protection, and a suspended ceiling of larch slats runs underneath. The roof measures 225.5 x 216.5 cm.

structure: steel, zinc coated and powder coated, trapezoidal polycarbonate with UV protection, suspended ceiling of wooden slats
material: larch
structure colour: 22 standard RAL shades
dimensions: 225.5 x 216.5 x 22.6 cm
weight: 63 kg
design: Egoé studio
€1,746.00
Egoe LEVA extended solid roof SLUM+, larch
Egoe LEVA extended solid roof SLUM+, larch
The SLUM+ extended solid roof reaches past the edge of the LEVA module and covers the strip in front of it as well. The steel structure is zinc coated and powder coated, the cover is trapezoidal polycarbonate with UV protection, and a suspended ceiling of larch slats runs underneath. The roof measures 225.3 x 315 cm.

structure: steel, zinc coated and powder coated, trapezoidal polycarbonate with UV protection, suspended ceiling of wooden slats
material: larch
structure colour: 22 standard RAL shades
dimensions: 225.3 x 315 x 22.6 cm
weight: 98 kg
design: Egoé studio
€2,335.00
Egoe LEVA folding roof, Kortexin
Egoe LEVA folding roof, Kortexin
The folding roof is a canvas cover you spread out or fold away as needed. The canvas is water-resistant polyester reinforced with aluminium alloy poles, the tension brackets are zinc coated and powder coated, and the tension wire is stainless steel. The roof weighs 14 kg, so one person can move it.

structure: aluminium alloy poles, zinc coated and powder coated steel tension brackets, stainless steel tension wire
material: water-resistant Kortexin polyester fabric
structure colour: 22 standard RAL shades
dimensions: 231 x 194.7 cm
weight: 14 kg
height of the folded cover: 200 to 150 mm
design: Egoé studio
€736.00
Egoe LEVA glass roof, glass
Egoe LEVA glass roof, glass
The glass roof lets daylight through and closes a LEVA module against rain. It combines tempered safety glass, a zinc coated and powder coated steel structure and rubber sealing strips. It is used in LEVA Office layouts, where the space below stays bright.

structure: steel, zinc coated and powder coated, rubber sealing strips
material: tempered safety glass
structure colour: 22 standard RAL shades
dimensions: 297 x 208 cm
weight: 193 kg
design: Egoé studio
€2,483.00
Egoe LEVA glass roof with side overhang, glass
Egoe LEVA glass roof with side overhang, glass
The glass roof with side overhang reaches past the edge of the LEVA module and covers the strip beside it. It combines tempered safety glass, a zinc coated and powder coated steel structure and rubber sealing strips. The overhang shelters an entrance or an outdoor bench from rain.

structure: steel, zinc coated and powder coated, rubber sealing strips
material: tempered safety glass
structure colour: 22 standard RAL shades
dimensions: 297 x 295.5 cm
weight: 250 kg
design: Egoé studio
€2,840.00
Egoe LEVA roof made of sandwich panels, sandwich panels
Egoe LEVA roof made of sandwich panels, sandwich panels
The sandwich panel roof closes a LEVA module with a solid, insulated surface. The FRP XPS panels are fibreglass reinforced and the steel structure is zinc coated and powder coated. Use it where the space has to stay closed in poor weather as well.

structure: steel, zinc coated and powder coated, FRP XPS sandwich panels with fibreglass reinforcement
material: sandwich panels
structure colour: 22 standard RAL shades
dimensions: 210.5 x 297.6 x 13.4 cm
weight: 98 kg
design: Egoé studio
€1,956.00
Egoe LEVA roof made of sandwich panels with a lateral overhang, sandwich panels
Egoe LEVA roof made of sandwich panels with a lateral overhang, sandwich panels
The sandwich panel roof with a lateral overhang covers a LEVA module and the strip beside it. The FRP XPS panels are fibreglass reinforced and the steel structure is zinc coated and powder coated. The overhang shelters an entrance or a work place next to the module.

structure: steel, zinc coated and powder coated, FRP XPS sandwich panels with fibreglass reinforcement
material: sandwich panels
structure colour: 22 standard RAL shades
dimensions: 297.6 x 297.6 x 13.4 cm
weight: 105 kg
design: Egoé studio
€2,249.00
Egoe LEVA fabric wall, Kortexin
Egoe LEVA fabric wall, Kortexin
The fabric wall closes one bay of a LEVA module and screens it from wind and from view. The canvas is waterproof polyester, the fittings are stainless steel and the wall attaches with velcro. It weighs 2 kg, so you take it down and store it in a few minutes.

structure: water-resistant polyester outdoor canvas, stainless steel fittings, velcro attachment
material: water-resistant Kortexin polyester fabric
dimensions: 206 x 224 cm
weight: 2 kg
design: Egoé studio
€165.00
Egoe LEVA blackboard wall with climbing holds, plywood
Egoe LEVA blackboard wall with climbing holds, plywood
The blackboard wall with climbing holds closes a LEVA bay and turns it into a play surface. The front is 18 mm outdoor plywood finished with blackboard paint and fitted with six climbing holds, and the back is 9 mm black outdoor plywood. The frame is larch treated with colourless oil.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: 22 standard RAL shades
dimensions: 198 x 221.5 x 7.6 cm
weight: 109 kg
climbing holds: 6 pieces
design: Egoé studio
€1,588.00
Egoe LEVA half-size blackboard wall with climbing holds, plywood
Egoe LEVA half-size blackboard wall with climbing holds, plywood
The half-size blackboard wall with climbing holds covers half a LEVA bay. The front is 18 mm outdoor plywood finished with blackboard paint and fitted with three climbing holds, and the back is 9 mm black outdoor plywood. Use it next to a half wall or beside the entrance to the cube.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: 22 standard RAL shades
dimensions: 99 x 221.5 x 7.6 cm
weight: 56.5 kg
climbing holds: 3 pieces
design: Egoé studio
€813.00
Egoe LEVA climbing wall, plywood
Egoe LEVA climbing wall, plywood
The climbing wall closes a LEVA bay and turns it into a climbing surface. The front is 18 mm outdoor plywood with pre-drilled M10 threaded holes and thirty climbing holds, and the back is 9 mm black outdoor plywood. Move the holds and the route changes.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: 22 standard RAL shades
dimensions: 198 x 221.5 x 7.6 cm
weight: 121 kg
climbing holds: 30 pieces, M10 threaded holes
design: Egoé studio
€2,614.00
Egoe LEVA half-size climbing wall, plywood
Egoe LEVA half-size climbing wall, plywood
The half-size climbing wall covers half a LEVA bay. The front is 18 mm outdoor plywood with pre-drilled M10 threaded holes and fifteen climbing holds, and the back is 9 mm black outdoor plywood. It suits smaller layouts and younger children.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood
structure colour: 22 standard RAL shades
dimensions: 99 x 221.5 x 7.6 cm
weight: 57.5 kg
climbing holds: 15 pieces, M10 threaded holes
design: Egoé studio
€1,299.00
Egoe LEVA sound insulating wall, recycled rubber
Egoe LEVA sound insulating wall, recycled rubber
The sound insulating wall closes a LEVA bay and cuts the noise inside. The front is 18 mm outdoor plywood with a recycled rubber absorber covered in fabric, the back is 9 mm black outdoor plywood, and the frame is wooden. It helps beside a busy road or between work places.

structure: wooden frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood, recycled rubber absorber
dimensions: 198 x 221.5 x 7.8 cm
weight: 134 kg
€1,413.00
Egoe LEVA half-size sound insulating wall, recycled rubber
Egoe LEVA half-size sound insulating wall, recycled rubber
The half-size sound insulating wall covers half a LEVA bay. The frame is larch, the front is 18 mm outdoor plywood with a recycled rubber absorber covered in geltex, and the back is 9 mm black outdoor plywood. You combine it with the other half-size walls of the system.

structure: larch frame, 18 mm outdoor plywood at the front, 9 mm black outdoor plywood at the back
material: outdoor plywood, recycled rubber absorber
dimensions: 99 x 221.5 x 7.8 cm
weight: 68 kg
€726.00
Egoe LEVA banner wall, PVC
Egoe LEVA banner wall, PVC
The banner wall carries a printed banner in a LEVA bay. The banner is outdoor mesh, hung and tensioned with steel elements and a rubber cord. It works for signage, sponsors or information at a fair, a festival or in public space.

structure: steel hanging and tensioning elements, rubber cord
material: PVC, printed outdoor mesh
dimensions: 211 x 198 x 0.2 cm
weight: 8.4 kg
printing of the banner is not included in the price and is quoted separately from the print data
design: Egoé studio
€260.00
Egoe LEVA slat wall, larch
Egoe LEVA slat wall, larch
The slat wall closes a LEVA bay with a run of larch slats. The frame is powder-coated aluminium alloy and the fasteners are stainless steel. The slats block the view and let air through, so the space stays ventilated.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch
structure colour: 22 standard RAL shades
dimensions: 192.9 x 3.5 x 224 cm
weight: 52 kg
design: Egoé studio
€1,111.00
Egoe LEVA two-thirds size slat wall with wooden planter, larch
Egoe LEVA two-thirds size slat wall with wooden planter, larch
The two-thirds size slat wall with wooden planter combines screening and planting in one LEVA bay. The upper part is larch slats in a powder-coated aluminium frame, and below sits a planter with wooden cladding and three galvanised inner pots. The wall stands 158.1 cm high.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel planter with larch cladding, three galvanised inner pots
material: larch
structure colour: 22 standard RAL shades
dimensions: 200.5 x 21.2 x 158.1 cm
weight: 58 kg
planter: uses the LEV200 pots
design: Egoé studio
€1,437.00
Egoe LEVA two-thirds size slat wall with metal planter, larch
Egoe LEVA two-thirds size slat wall with metal planter, larch
The two-thirds size slat wall with metal planter is the version with a smooth sheet metal planter face. The upper part is larch slats in a powder-coated aluminium frame, and below sits a steel planter with three galvanised inner pots. The wall stands 158.1 cm high.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel planter with steel sheet cladding, three galvanised inner pots
material: larch
structure colour: 22 standard RAL shades
dimensions: 200.5 x 21.2 x 158.1 cm
weight: 57 kg
planter: uses the LEV201 pots
design: Egoé studio
€1,511.00
Egoe LEVA one-third size slat wall with integrated table, larch
Egoe LEVA one-third size slat wall with integrated table, larch
The one-third size slat wall with integrated table offers screening and a work surface in one element. The wall is larch slats in a powder-coated aluminium frame, the table structure is zinc coated and powder coated steel, and the top is HPL. The table stands 64 cm high and suits bench seating.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel table structure
material: larch, HPL table top
structure colour: 22 standard RAL shades
dimensions: 200.5 x 77 x 64 cm
weight: 61 kg
design: Egoé studio
€1,601.00
Egoe LEVA half-size slat wall with integrated bar table, larch
Egoe LEVA half-size slat wall with integrated bar table, larch
The half-size slat wall with integrated bar table sets a counter into the edge of a LEVA module. The wall is larch slats in a powder-coated aluminium frame, the table structure is zinc coated and powder coated steel, and the top is HPL. The counter stands 110 cm high and is made for standing use.

structure: powder-coated aluminium alloy, zinc coated and powder coated steel table structure
material: larch, HPL table top
structure colour: 22 standard RAL shades
dimensions: 200.5 x 38 x 110 cm
weight: 59 kg
design: Egoé studio
€1,537.00
Egoe LEVA half-size slat wall, larch
Egoe LEVA half-size slat wall, larch
The half-size slat wall covers half a LEVA bay. The slats are larch, the frame is powder-coated aluminium alloy and the fasteners are stainless steel. Use it beside an entrance or where only part of a side needs screening.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch
structure colour: 22 standard RAL shades
dimensions: 94.5 x 3.5 x 224 cm
weight: 26 kg
design: Egoé studio
€553.00
Egoe LEVA slat wall with integrated whiteboard, larch
Egoe LEVA slat wall with integrated whiteboard, larch
The slat wall with integrated whiteboard brings a writing surface into a LEVA module. The wall is larch slats in a powder-coated aluminium frame, and the board is dibond. It is used in LEVA Office layouts and in outdoor classrooms.

structure: powder-coated aluminium alloy, stainless steel fasteners
material: larch, dibond whiteboard
structure colour: 22 standard RAL shades
dimensions: 192.9 x 3.5 x 224 cm
weight: 81.4 kg
design: Egoé studio
€1,501.00